Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Brakes

2012 International Workstar Brake problems

No owner has filed a complaint about the 2012 International Workstar's brakes with NHTSA. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.

Complaints
0
Recalls
6
Crashes
0
Fires
0
Injuries
0
Deaths
0

Brake recalls for the 2012 International Workstar

Service brakes

14V0640001,196 vehicles affected

The problem
Navistar Inc., is recalling certain model year 2012-2013 International Lonestar, Paystar, Prostar, Workstar and 9900 trucks, equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture.
The risk
S-cam bracket fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during braking and/or increase the stopping distance. Either result may increase the risk of a crash.
The fix
Navistar will notify owners, and dealers will replace the S-cam brake assemblies with a brake assembly with cast spiders and S-cam tube bracket assemblies with reinforced gussets, free of charge. The recall began on March 27, 2014. Owners may contact Navistar at 1-331-332-1590. Navistar's number for this recall 14501. Note: This recall is an expansion of recall 13V231.

Parking brake: chamber

12V465000559 vehicles affected

The problem
Navistar is recalling certain model year 2013 International 8600, 2012 and 2013 Durastar, 2011-2013 ProStar, and 2012 WorkStar trucks, manufactured from November 23, 2010, through April 02, 2012, and equipped with piston spring brake feature code 04EVP. The piston bore area of the parking brake chamber may have an air leak could result in the parking brake not fully releasing.
The risk
If the parking brake does not fully release, the service brakes may lock up without warning, increasing the risk of a crash.
The fix
Navistar will notify owners, and dealers will replace the spring brake chamber free of charge. The safety recall began on November 6, 2012. Owners may contact Navistar at 1-331-332-1590.

Service brakes: disc

12V403000956 vehicles affected

The problem
Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.
The risk
An unexpected pull condition during braking application or an unexpected increase in stopping distance, increases the risk of a crash, leading to property damage, personal injury, or death.
The fix
Navistar will notify owners, and dealers will replace any missing caliper mounting bolts and tighten caliper mounting bolts, free of charge. The safety recall began on October 30, 2012. Owners may contact Navistar at 1-331-332-1590.

Service brakes: check valve

12V05200017,867 vehicles affected

The problem
Navistar is recalling certain model year 2012-2013 ic bus ce-c, hc, and international 9400 and certain model year 2011 through 2013 international durastar, paystar, workstar, transtar, lonestar, prostar, 9200, and 9800, and certain model year 2013 international 9900, vehicles, manufactured from december 2, 2010, through january 26, 2012, and equipped with bendix atr-6 traction relay valves. In extremely cold conditions, these bendix relay valves may potentially develop internal leakage. Internal leakage can lead to air pressure being delivered to affected primary or secondary brakes causing continuous brake application.
The risk
Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. Unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. Also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
The fix
Navistar will notify owners, and dealers will provide a temporary repair until bendix develops a permanent remedy. This service will be performed free of charge. The safety recall began on april 10, 2012. Owners may contact navistar at 1-800-448-7825.

Service brakes: control unit / module

11V2520002,543 vehicles affected

The problem
Navistar is recall certain model year 2011 and 2012 international durastar, paystar, workstar, transtar, lonestar and prostar commercial trucks manufactured from november 5, 2010, through march 10, 2011, for failing to comply with federal motor vehicle safety standard no. 121, "Air brake systems (abs)." The trailer abs fault indicator lamp in the instrument cluster will not illuminate due to a programming or hardware issue with the brake system electronic control unit.
The risk
An inoperable trailer abs fault indicator may prevent the driver from being aware of a trailer abs fault condition Thereby possibly increasing the risk of a crash potentially Resulting in property damage, personal injury, or death.
The fix
Navistar will notify owners. Dealers will reprogram or replace the brake system electronic control unit free of charge. The safety recall began on may 12, 2011. Owners may contact navistar at 1-800-448-7825.

Service brakes: automatic

11V16700033 vehicles affected

The problem
Navistar is recall certain model year 2011 and 2012 international durastar and workstar commercial trucks manufactured from october 19, 2010, and february 3, 2011, equipped with gunite automatic slack adjusters. Due to an incomplete "knitting" of the iron at the time of casting, inadequate structural integrity of the slack adjuster housing can occur, which could cause the housing to break at the handle under normal operating loads.
The risk
If the slack adjuster housing were to break, the wheel brake to which the slack adjuster is attached would no longer function, reducing braking capacity and, in some cases, causing the vehicle to pull to one side. Reduced braking performance and/or loss of steering control increases the risk of a crash.
The fix
Navistar will notify owners and dealers will replace the subject slack adjusters free of charge. The safety recall is expected to begin on or about april 1, 2011. Owners may contact navistar at 1-800-448-7825.

Brake complaints

No complaints about this area yet.

International Workstar brake complaints by year

Workstar brake problems, every year

Had a brake problem with your 2012 Workstar? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience