- The problem
- On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- The risk
- If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
- The fix
- Dealers will replace the ball socket assemblies. This campaign will supersede nhtsa recall nos. 01V-140-005 (mack sc0270) and 00v-246-103 (mack sc0262). Owner notification began december 27, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
Vehicle safety record
2000 Mack CL Problems, complaints & recalls
No owner complaints about the 2000 Mack CL have been filed with NHTSA. It is covered by 4 recalls, the latest in August 2002 for the tie rod assembly.
NHTSA data checked
DMore problems than a typical CL year, for its age
- Complaints
- 0
- Recalls
- 4
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
2000 Mack CL recalls 4
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning.
- The risk
- The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
- The fix
- The dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. Owner notification began april 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
- The problem
- Vehicle description: heavy duty trucks equipped with certain meritor-wabco brake system two and four port relay valves. The valve may stick open when a high-pressure application is released.
- The risk
- When the valve sticks open, it can result in a total loss of air from either the service or the park brake system. The driver may lose braking ability under a service application, possibly resulting in a vehicle crash.
- The fix
- Dealers will replace these valves. Owner notification began november 16, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011 or meritor wabco at 800-535-5560.
- The problem
- Vehicle description: class 8 trucks equipped with felsted electronic accelerator pedals. The return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated wire return springs.
- The risk
- This condition could cause the pedal to go to full throttle if both return springs break, increasing the risk of a crash.
- The fix
- Replacement accelerator pedals equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating will be installed.
What owners say
Be the first CL owner to share.
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 2000 Mack CL yet
No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.
Mack CL: every year compared
All CL years2000 Mack CL vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2000 Mack CL | 0 | 4 | D | |
| 2000 Mack RD | 2 | 5 | F | Compare |
| 2000 Mack Vision | 1 | 0 | - | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2000 Mack CL
Does the 2000 Mack CL have any recalls?
Yes - NHTSA lists 4 recalls for the 2000 Mack CL: tie rod assembly (August 2002); rear (March 2002); controls, pedals and linkages (August 2001); accelerator pedal (October 2000). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 2000 Mack CL had?
None have been filed with NHTSA so far.
Is the 2000 Mack CL a reliable vehicle?
Its Safety Index is 26 out of 100 (grade D: more problems than a typical Mack CL year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Mack CL years have the most complaints?
1995 (1), 1998 (1), 1999 (1). See every Mack CL year compared.
What should I do if my 2000 Mack CL has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data