Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2010 Mazda MAZDA6 Problems, complaints & recalls

Owners have filed 225 complaints about the 2010 Mazda MAZDA6 with NHTSA, most often about the body, doors & structure (61) and the airbags (54). Those complaints describe 5 crashes, 2 fires and 2 injuries. It is covered by 9 recalls, the latest in October 2019 for the inflator module. For comparison, the 2009 has 386 and the 2011 has 136.

NHTSA data checked

DMore problems than a typical MAZDA6 year, for its age

#61 most complained-about 2010 vehicle

Complaints
225
Recalls
9
Crashes
5
Fires
2
Injuries
2
Deaths
0

Most common 2010 Mazda MAZDA6 problems

Share of all 225 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2010 Mazda MAZDA6 recalls 9

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Air bags: inflator module

19V78200069,879 vehicles affected

Do not drive
The problem
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
The risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The fix
Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.

Air bags: inflator module

18V717000155,436 vehicles affected

Do not drive
The problem
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The fix
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.

Suspension: control arm

18V63100050,176 vehicles affected

The problem
Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.
The risk
Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.
The fix
Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

Air bags: inflator module

18V01800070,227 vehicles affected

Do not drive
The problem
Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The fix
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began March 2, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F.

Air bags: inflator module

17V429000205,377 vehicles affected

Do not drive
The problem
Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
The fix
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.

Air bags: sensor / control module-inactive

16V59400041,918 vehicles affected

The problem
Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.
The risk
Failure of the ACU would illuminate the air bag warning light and prevent the air bags from deploying in the event of a crash, increasing the risk of injury.
The fix
Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.

Fuel system

14V11400042,000 vehicles affected

The problem
Mazda North America Operations (Mazda) is recalling certain model year 2010-2012 Mazda6 vehicles manufactured September 14, 2009, through May 2, 2011, and equipped with 2.5L engine. In the affected vehicles, spiders may weave a web in the evaporative canister vent hose, blocking it and causing the fuel tank to have an excessive amount of negative pressure.
The risk
Negative pressure could cause the fuel tank to crack resulting in a fuel leak, increasing the risk of a fire.
The fix
Mazda will notify owners, and dealers will reprogram the powertrain control module and inspect and clean the canister vent line. If a web was found in the line, the fuel tank and check valve on canister vent line will be replaced. These repairs will be done free of charge. The recall began on April 30, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number associated with this campaign is 7214C.

Latch

13V425000161,400 vehicles affected

The problem
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.
The risk
If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.
The fix
Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.

Fuel system: tank assembly

11V13400052,000 vehicles affected

The problem
Mazda is recalling certain model year 2009-2010 mazda6 vehicles manufactured from april 8, 2008, through february 8, 2010. A certain type of spider may weave a web in the evaporative canister vent line and this may cause a restriction in the line. If this occurs, the fuel tank pressure may become excessively negative when the emission control system works to purge the vapors from the canister.
The risk
As the canister is purged repeatedly during normal operation, the stress on the fuel tank may eventually result in a crack, potentially leading to fuel leakage ad an increased risk of fire.
The fix
Dealers will inspect and clean up the canister vent line, and install a spring to prevent this type of spider from entering the vent line. This service will be performed free of charge. The safety recall is expected to begin on or before march 25, 2011. Owners may contact mazda customer assistance center at 1-800-222-5500.

What owners say

Be the first MAZDA6 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

225 complaints about the 2010 Mazda MAZDA6

Newest first, as filed with NHTSA by owners. Page 1 of 9.

Suspension

I recently had my front subframe replaced as part of your recall, however, the rear subframe and all components attached are suffering from the exact same rust and potential component failure as the front. I was replacing my brakes today and noticed that the entire structure is on the verge of complete failure. The right rear suspension already makes unusual noises when going over even small bumps and I imagine if I were to hit a large pothole that would probably be the end of this car. I imagine all similar Mazda...

Read the full complaint

6s in the Midwest suffer from the exact same degradation and it is a major safety concern. There are places where there's chunks of subframe missing because it has rusted completely through and just disintegrated.

Filed Incident SuspensionNHTSA 11746080
Suspension

I looked up recalls on my vehicle and it states that The 2011 Mazda6 is part of a recall (NHTSA 19V-323, Mazda 2818I) covering 2011-2013 models for front cross member (subframe) corrosion due to insufficient rust protection . In salt-belt states, this corrosion can cause the lower control arm to detach, reducing steering control and increasing crash risk. Key Details regarding the 2011 Mazda6 Subframe Recall: Scope: The recall affects specific 2011-2013 Mazda6 vehicles (and 2009-2010 models in a previous, related...

Read the full complaint

recall). Location Restrictions: Vehicles must have been originally sold in, or currently/previously registered in, 23 "salt belt" states (including CT, NY, MI, MN, OH, etc.). The Issue: The front cross member may experience severe corrosion, causing structural failure of the passenger-side lower control arm mounting point. Symptoms: Drivers may notice a change in steering alignment or a broken cross member. Remedy: Dealers will inspect the cross member and replace it if necessary. Action Required: Owners should contact their local Mazda dealership to check their VIN for open recalls. The recall was officially announced in May 2019 and is an expansion of a 2018 action.

Filed Incident Suspension · Unknown or otherNHTSA 11715942
SteeringBody, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently veered to the left. There was no warning light illuminated. The contact stated that the vehicle became difficult to steer. The vehicle was taken to an independent mechanic where it was diagnosed and determined that the engine cradle had failed and was severely rusted and needed to be replaced. The vehicle was not repaired. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 114,000.

Filed Incident Steering · StructureNHTSA 11649768
Airbags

The airbag light is still flashing on the dashboard after the airbag recall on this vehicle was fixed. It may be related to a different recall, which is safety campaign #16V594000.

Filed Incident Air bagsNHTSA 11643653
Suspension

Extensive rust and corrosion in rear subframe. So severe the vehicle is unsafe to drive.

Filed Incident SuspensionNHTSA 11624391
Suspension

2010 mazda 6 i series sedan the entire rear subframe/cradle is rotted along with all the other parts connected to it, the A arm, bumper stops, control arms, rear sway bar the entire rear under carriage. took it to the shop and they said there have been several complaints about this exact issue on several of these cars from 09-13 models. the parts was not painted correctly like the front that was recalled. exposed to all weather elements, the shop wants almost 4k for labor only to fix but the main problem is...

Read the full complaint

finding the rear subframe on these cars is almost impossible next to cost a fortune. now i have a yard ornament. junk yard wants to give me 170 bucks for the car but im not doing that. Mazda needs to fix this issue. i would of never know it was rotted out unless i took it to the shop for rear swaying and sagging. its all over the road. very dangerous and will cause a wreck almost certainly. please someone do something about this issue. dont have the money to fix this let alone buy another car.

Filed Incident SuspensionNHTSA 11604971
Suspension

The rear subframe is compromised; it separated from the body of the car. The vehicle is in my driveway and available for inspection should the need arise. The rear end had felt a bit shaky for a month so I took it to my mechanic, who declared the vehicle "unfit for the road" due to the fact that the subframe was rotted away and detached from the car itself. I was told one big bump is an accident waiting to happen...pieces of the car would go flying and I could be left with zero mobility to evade oncoming traffic....

Read the full complaint

The possibility of projectiles injuring anyone around the car was enough for me to park it. The car has not been inspected by Mazda, the police, or insurance because there was no accident. Since it's not safe to drive, I took the word of my independent mechanic rather than driving it to a dealership. There were no warnings other than a bit of a sway in the rear end, which I originally attributed to its age. I've researched the issue and it seems to be a result of subpar quality with regard to the metal that was used in manufacturing.

Filed Incident SuspensionNHTSA 11587423
Body, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated while driving 40-45 MPH, there was an abnormal sound coming from the vehicle. The TPMS warning light was illuminated. The vehicle was taken to an independent mechanic, who informed the contact that the rear main sub frame was completely rusted. There was a crack detected in the middle of the sub frame. The vehicle was taken to the local dealer, where it was diagnosed that the rear sub frame was rusted and needed to be replaced. The vehicle was not repaired. The manufacturer informed the contact that it was normal wear and tear, but no assistance was provided. The failure mileage was approximately 130,000.

Filed Incident StructureNHTSA 11572146
Suspension

Rear sub frame on car rusting out. Never protected from corrosion or rust. Car is currently in shop. Car has rusted out in the joint just behind drivers rear tire. Received notice of recall on the front of car due to salt and weather conditions front sub frame area replaced . Currently multiple cars have same issues Mazda hasnt fixed or issued any repairs for this

Filed Incident SuspensionNHTSA 11570548
Suspension

My gf went for a basic oil change and the automotive person was shocked to find the rear right cross bar to be suffering from incredible corrosion. He said at this point it is unsafe to drive. We looked into recalls for this make and model and there is one for the front cross bar due to insufficient or improper application of a corrosion spray on the frame. How can they say the front needs to be recalled and not the back? If the dealership didn't do a good job of covering the appropriate metal frame in corrosion resistant spray any car that has that level should be recalled. This is immensely dangerous

Filed Incident SuspensionNHTSA 11549093
Other & unknown

Mazda issued a extended warranty for sticky dash board and supposedly mailed notices to owners. I never received one and dispute the fact they mailed it to all owners. The sticky dash repair should be issued as a recall as it presents a significant safety issue. The sticky dash is so shiny that it reflects sun into driver's eyes and should be considered a significant safety issue. I request the NHTSA to mandate Mazda to make the sticky dash repair a recalled issue versus allowing them to issue a extended...

Read the full complaint

warranty. I never got the notice and the issue existed within the warranty period. In addition, what happens if the issue arises after the warranty period. This sticky dash is a defect in the manufacturing of the vehicle and presents a significant safety issue to drivers as it impacts their road visibility, which may lead to increased accidents. Please have Mazda issue a recall on the sticky dash repair due to the manufacturer's defect. Thank you.

Filed Incident Unknown or otherNHTSA 11541192
SuspensionBody, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the rear frame detached from the vehicle. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 18V631000 (Suspension, Structure) and the contact related the failure to the recall. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 160,000.

Filed Incident Suspension · StructureNHTSA 11538412
Suspension

The rear frame completely corroded. I was on my way to work this morning and the frame broke due to corrosion. I almost lost my life this morning. According to the recall only the front end was considered faulty. I took the vehicle in for the recall and only the front was looked at and replaced.

Filed Incident SuspensionNHTSA 11538302
Suspension

I took car to dealership for recall repair (3) one of which was for front sub-frame corrision While it was there thet called Me and said that the rear sub-frame was rausted so bad it was unsafe to drive and that it would cost $4600 to fix it. It seems to Me if You aknowledge a corrision problem in the front then You would accept responsibility for rear. Mazda said that They would have fixed it if the title were not branded ? It was wrecked in the front end and I replaced hood grille bumper lights etc and has...

Read the full complaint

nothing to do with the rear sub-frame. The Mazda Forum say's that it is shoddy workmanship. This car only has 147,000 miles on it and runs like a new car. I am a US army Vet 10 years) and am retired and cannot afford to fix this on My own and this is about doing what is right so I am asking You to help Me to get this problem fixed so I can drive this car. Thank You,

Filed Incident SuspensionNHTSA 11532534
SteeringSuspensionWheels & tires

While im driving the steering is shifting to the right and seems lower on right side. My tires daily need to have air in them because of the uneven weight. While I drive and let go of the gas the car pulls back like an E brake could be stuck not sure though. No accidents at all but it seems like the vehicle is getting weaker and weaker with the uneven weight going down on the tires and steering seems like it's going to crash onto the right without being able to control it.

Filed Incident Steering · Suspension · WheelsNHTSA 11526861
Body, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated that the dashboard on the passenger's side of the vehicle was melted, causing a glare on the windshield which obstructed the view of the contact while driving. The vehicle was taken to the dealer; however, the warranty had expired. The manufacturer was made aware of the failure. The failure mileage was approximately 32,000.

Filed Incident StructureNHTSA 11526027
SuspensionBody, doors & structureCrash

The contact owns a 2010 Mazda Mazda6 . The contact stated while driving approximately 25 mph and drove over a bump and lost control of the vehicle and crashed into another vehicle. The contact stated the disc off warning light was illuminated. The contact stated no one was injured nor sought medical attention. A police report was not filed. The vehicle was not drivable. The contact was towed to her residence and then to a local dealer, where it was diagnosed with the rear structure was corroded and needed to be...

Read the full complaint

replaced. The vehicle was not repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 180,000. The contact stated that the dealership deemed the vehicle unsafe to bring to the shop and therefore did not perform the necessary repairs in the recall. The dealer notified the contact about that as well as the manufacturer. The contact must arrange a way to tow the vehicle off of their lot.

Filed Incident Suspension · StructureNHTSA 11515224
Suspension

The rear subframe is corroded with rust to the point of about to break into pieces. I did not have control of the vehicle and could not drive above 40mph, sudden pull to one side while braking, loose steering. I could have had a wreck if the subframe would have broke before taking the vehicle in to be inspected by an independent service center. I live over an hour to the nearest Mazda dealership and the car is not drivable. No warning lamps came on and I first noticed the problems around January 11,2023. The part...

Read the full complaint

looks completely tissue thin all over and the rest of the components look new bolted to it. I do have pictures from the independent service center. I think the car needs to be seen by a regional service manager like a Mazda engineer. This is not just rust this is a defective part that was to thin to begin with.

Filed Incident SuspensionNHTSA 11504756
Suspension

The contact called on behalf of a client who owns a 2010 Mazda Mazda6. The contact stated that the steering wheel failed to operate as designed and the vehicle was pulling either to the left or the right. The vehicle was diagnosed that the rear passenger's side cross member was rusted and needed to be replaced. The dealer was notified of the failure and the contact was advised that the rear cross member was not covered. The vehicle was not repaired. The manufacturer was notified of the failure and the mechanic was informed that the customer was liable for the cost of the repair. The failure mileage was approximately 70,000.

Filed Incident SuspensionNHTSA 11504534
Suspension

Rear subframe is rotted

Filed Incident SuspensionNHTSA 11475491
Body, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the vehicle made abnormally loud sounds. The vehicle was taken to the dealer where it was diagnosed that the rear cross members and brakes needed to be replaced. The dealer advised the contact to not drive the vehicle until the repairs were performed. The vehicle was then taken to an independent mechanic who replaced the brakes; however, the rear cross members were not replaced. The manufacturer was not made aware of the failure. The failure mileage was approximately 186,000.

Filed Incident StructureNHTSA 11471554
Other & unknown

The dasboard on the rite side is melting, causing a sicky like surface and is reflecting the light on to the driver, making it hard to drive.

Filed Incident Unknown or otherNHTSA 11471007
SuspensionBody, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated that the vehicle had previously been serviced at the dealer under NHTSA Campaign Number: 18V631000 (Suspension, Structure). The contact stated that while driving at an undisclosed speed, she lost control of the vehicle. The failure caused the passenger's side rear tire to rub on the fender while driving. The vehicle was taken to an independent mechanic who diagnosed that the passenger's side rear subframe was severely corroded and had fractured in half. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 82,000.

Filed Incident Suspension · StructureNHTSA 11469128
Suspension

Crossmember rust from recall campaign 2818I is able to effect structural attachment despite recall work. The recall installed an "improved: cross member. This was not an actually replacement cross member, rather additional plate steel between the rear and front of the existing attachment points of the defective OE cross member. Improved cross member contains no provisions to support rapidly corroding lower control arm attachment point in original cross member. Added member for recall also does not appear to...

Read the full complaint

additionally support lateral stresses from control arm. Evaluation of original cross-member seemed inadequate to detect structural integrity based on condition of the cross member today. "improved" cross member does not support mounting points of the control arm. Based on recall documents, some "improved" cross members have supports for Lower Control Arm (LCA) mounts. This issued occurred with sudden change in steering and braking characteristics. Vehicle suddenly started pulling right. Issue further exacerbated after follow on braking. Passenger wheel suddenly lost alignment and camber is indicating lower attachment geometry change. I was able to control vehicle, but with significant effort.

Filed Incident SuspensionNHTSA 11468983
Transmission & drivetrainElectrical system

Car won't start due to PCM/TCM lost communication.

Filed Incident Power train · Electrical systemNHTSA 11458436

Mazda MAZDA6: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20141374140Electrical systemC
201323410BrakesA
2012100652AirbagsC
2011136681SuspensionC
2010225952Body, doors & structureD
20093861083Body, doors & structureF
20081115152AirbagsC
20071656152AirbagsD
20061936141AirbagsD
All MAZDA6 years

2010 Mazda MAZDA6 vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2010 Mazda MAZDA6? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2010 Mazda MAZDA6

Does the 2010 Mazda MAZDA6 have any recalls?

Yes - NHTSA lists 9 recalls for the 2010 Mazda MAZDA6: inflator module (October 2019); inflator module (October 2018); control arm (September 2018); inflator module (January 2018) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2010 Mazda MAZDA6?

By the complaints owners filed with NHTSA, the most common problem areas are the body, doors & structure (61), airbags (54), suspension (43).

How many complaints has the 2010 Mazda MAZDA6 had?

225 complaints have been filed with NHTSA, the first on August 2, 2010 and the latest on June 23, 2026. Of these, 5 describe a crash and 2 a fire, and together they report 2 injuries and 0 deaths.

Is the 2010 Mazda MAZDA6 a reliable vehicle?

Its Safety Index is 31 out of 100 (grade D: more problems than a typical Mazda MAZDA6 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Mazda MAZDA6 years have the most complaints?
What should I do if my 2010 Mazda MAZDA6 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience