Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2009 Mazda MAZDA6 Problems, complaints & recalls

Owners have filed 386 complaints about the 2009 Mazda MAZDA6 with NHTSA, most often about the body, doors & structure (130) and the suspension (76). Those complaints describe 8 crashes, 3 fires and 5 injuries. It is covered by 10 recalls, the latest in October 2019 for the inflator module. For comparison, the 2008 has 111 and the 2010 has 225.

NHTSA data checked

FFar more problems than a typical MAZDA6 year, for its age

#27 most complained-about 2009 vehicle

Complaints
386
Recalls
10
Crashes
8
Fires
3
Injuries
5
Deaths
0

Most common 2009 Mazda MAZDA6 problems

Share of all 386 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2009 Mazda MAZDA6 recalls 10

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Air bags: inflator module

19V78200069,879 vehicles affected

Do not drive
The problem
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
The risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The fix
Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.

Suspension: control arm

18V63100050,176 vehicles affected

The problem
Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.
The risk
Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.
The fix
Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

Air bags: inflator module

18V01800070,227 vehicles affected

Do not drive
The problem
Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The fix
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began March 2, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F.

Air bags: inflator module

17V45700079,402 vehicles affected

Do not drive
The problem
Mazda North America Operations (Mazda) is recalling certain 2012 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain 2009 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain 2007-2008 CX-7 and CX-9 sold, or ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
The fix
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger side air bag inflator with an alternate inflator, free of charge. The recall began October 4, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 17V-012.

Air bags: inflator module

17V429000205,377 vehicles affected

Do not drive
The problem
Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
The fix
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.

Air bags: sensor / control module-inactive

16V59400041,918 vehicles affected

The problem
Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.
The risk
Failure of the ACU would illuminate the air bag warning light and prevent the air bags from deploying in the event of a crash, increasing the risk of injury.
The fix
Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.

Latch

13V425000161,400 vehicles affected

The problem
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.
The risk
If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.
The fix
Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.

Fuel system: tank assembly

11V13400052,000 vehicles affected

The problem
Mazda is recalling certain model year 2009-2010 mazda6 vehicles manufactured from april 8, 2008, through february 8, 2010. A certain type of spider may weave a web in the evaporative canister vent line and this may cause a restriction in the line. If this occurs, the fuel tank pressure may become excessively negative when the emission control system works to purge the vapors from the canister.
The risk
As the canister is purged repeatedly during normal operation, the stress on the fuel tank may eventually result in a crack, potentially leading to fuel leakage ad an increased risk of fire.
The fix
Dealers will inspect and clean up the canister vent line, and install a spring to prevent this type of spider from entering the vent line. This service will be performed free of charge. The safety recall is expected to begin on or before march 25, 2011. Owners may contact mazda customer assistance center at 1-800-222-5500.

Equipment

09E0110002,323 vehicles affected

The problem
Thule, inc. Is recalling 2,323 owner-installed roof-mounted fit kits, models 3068 and 3069, manufactured between january 1, 2008 and february 28, 2009 that are used with thule podium foot packs, models 460 and 460r. These fit kits were sold as aftermarket equipment for use on the vehicles listed above. The bolt(s) used to secure the foot to the vehicle was manufactured to a hardness that may cause the bolt(s) to be brittle and potentially break under stress.
The risk
This may result in the bolt(s) snapping off during use or without a load. The unsecured rack and load can then come loose while driving creating a potential road hazard, possibly resulting in a vehicle crash.
The fix
Thule will mail a retro fit kit along with repair instructions to owners free of charge. The safety recall is expected to begin on or before april 13, 2009. Owners may contact thule toll-free at 1-800-238-2388.

Structure: hinge and attachments

09V04300029,000 vehicles affected

The problem
Mazda is recalling 29,000 my 2009 mazda6. The outer door handles may stick which may prevent the door from latching. This situation may allow the door to open while the vehicle is in motion.
The risk
Driving the vehicle with the door unlatched could lead to an unbelted occupant being ejected and could result in death or injury.
The fix
Dealers will inspect the door handles and if necessary repair or replace the handles free of charge. The recall began on february 13, 2009. Owners may contact mazda at 1-800-222-5500.

What owners say

Be the first MAZDA6 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

386 complaints about the 2009 Mazda MAZDA6

Newest first, as filed with NHTSA by owners. Page 1 of 16.

Suspension

Rear cross member broke due to corrosion breaking off lateral arm from driver side of cross member, I may add the front crossmember was repaired due to recall for extreme corrosion not too long ago, as I research this problem I uncover many owners of this vehicle having the same issue in the northeast,even with much lower mileage.mazda should be held accountable.$3,926.62 for part alone on Mazda parts.com

Filed Incident Suspension · Unknown or otherNHTSA 11750964
Suspension

The rear subframe rusted out and my control arm broke off! This is extremely serious and because there is no recall I'm going to have to buy an another vehicle. Please issue a recall. I've read forms about this and many others have had the same issue with the rear subframe corroding and rotting out.

Filed Incident SuspensionNHTSA 11734456
Body, doors & structure

My rear subframe rusted thru and has holes in it. It is too dangerous to drive and mazda won't recall the rear like the front subframe knowing that a lot of people are suffering from the same issue. A subframe should last a long time. My mechanic inspected the car and feels like it's not safe to drive.

Filed Incident StructureNHTSA 11699875
Other & unknown

This car was purchased in 2017 and maintenanced regularly. We recently took it to have the oil changed and to check out a noise that was coming from the passenger side. We were told that the subframe was rusted so badly it was too dangerous to drive and would cost $7k to repair. That caught us by surprise and we ended up having to buy a car by the next day. We traded the car in... However, I started doing some research and noted that this is very common and there was a recall between 2010 and 2014. I'm pretty upset that we lost this car without having any recall notification after the purchase. Could this have been taken care of instead of having to get a new car?

Filed Incident Unknown or otherNHTSA 11690156
Suspension

Component or System that Failed: The front subframe on my 2009 Mazda 6i Touring is completely rusted through. There are holes in the frame and large flakes of rusted metal breaking off. The car is available for inspection if needed. Safety Risk: This is a serious safety concern because if the subframe fails, I could lose steering or suspension control while driving. That would put me and other drivers at immediate risk of an accident. Reproduction / Confirmation: An independent mechanic confirmed the problem and...

Read the full complaint

told me the car is unsafe to drive in its current condition. Inspection: The vehicle had the original Mazda subframe corrosion recall performed years ago, but now the same exact problem has come back. The car has not yet been re-inspected by Mazda, but the severity of the rust is obvious. Warning Lamps / Symptoms: There were no warning lights or messages before this happened. The issue was only noticed when the rust and holes became visible on the underside of the car during a recent inspection.

Filed Incident SuspensionNHTSA 11683036
Suspension

Hello, My name is [[redacted]] . I took our Mazda 6 in for wheel balance and alignment and was informed of very serious rust issues in the rear suspension. I was pretty shocked at what they showed me. I worked at Raben Tire for 10 years and I've never seen anything like this. I have two retired mechanic friends look at it, and they (along with the mechanic from firestone) said they cannot even fathom how this level of rust is possible (80+% of the miles on this vehicle are highway). One of my retired mechanic...

Read the full complaint

friends started looking into it and said he'd noticed the 09 Mazda recalls for suspension rust. We all thought that made sense given how immensely abnormal this rusting is. The recall list sent to me says "front" suspension. I'm not sure why the front is listed and not the rear, but this, to all of us, is very clearly faulty (the rusting is INCREDIBLY abnormal) and we believe should be considered as part of the suspension rust recall (there are no rusting issues anywhere else). Ive provided pictures. This is incredibly unsafe. The rear suspension could collapse at any moment while driving and cause casualties. Thank you for your time, [[redacted]] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Incident SuspensionNHTSA 11680053
Airbags

The passenger crash pad has deteriorated and become sticky and cracked. This may affect deployment of airbag and perhaps allow outside environmental elements to affect the airbag. The takata fiasco being an example of environmental factors affecting airbag safety.

Filed Incident Air bagsNHTSA 11658729
SuspensionBody, doors & structure

The front and rear crossmembers have significant rust. The front has holes and chunks of metal missing due to rust corrosion. The rear has flaking and is deeply pockmarked with rust. These are structural components. Failure can lead to a crash.

Filed Incident Suspension · StructureNHTSA 11658728
Suspension

The rear Suspension Frame has failed due to corrosion. The right rear tire has worn severely from the premature failure of that part on the right side. I feel it was a defect in Engineering by Mazda. My email: [[redacted]] Mobile: [[redacted]] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Incident SuspensionNHTSA 11652399
Suspension

The rear frame has failed due to corrosion on the right side. The rear passenger tire is canted in on the topside worn severely worn. This was noted when I drove home from my job. This is a critical part of the vehicle and should've never failed. I'm hopeful to hear from the NHTSB for a repair to be done properly by Mazda;

Filed Incident SuspensionNHTSA 11650252
Suspension

Rear suspension cross-member corroded to the point that a minor pothole separated the right lower control arm mounting point from the cross-member, rendering the car undrivable. The rest of the car is fairly rust-free.

Filed Incident SuspensionNHTSA 11647355
Suspension

Rear subframe corrosion

Filed Incident SuspensionNHTSA 11630883
SuspensionBody, doors & structure

2009 Mazda 6 Rear subframe and springs are deemed unsafe due to extreme rusting and corrosion. The vehicle is registered and has been registered in both NY and PA (salt states), however was regularly washed and garage maintained. Vehicle will no longer pass inspection due to this issue and Mazda indicates no recall for the rear at this time and is ignoring that this is a highly prevalent issue. Mazda recalled and acknowledged this issue on these makes/models related to the front; however refuses to acknowledge...

Read the full complaint

and repair/recall the issue extending to the rear. The vehicle is in otherwise good shape, and the extreme rusting to the subframe/springs is not consistent with normal wear and tear. This is an extremely prevalent issue arising to these vehicles being ignored by Mazda. Mechanics are indicating the issue is extremely deteriorated and not safe, but that the vehicle is in otherwise good shape and the issue is consistent with faulty parts.

Filed Incident Suspension · StructureNHTSA 11616055
AirbagsEngine & coolingFuel system

Vehicle jerks at low speed when accelerate and idle when accelerate, P0766 Code shows, engine noise and gears jump, when reverse the vehicle jerks.

Filed Incident Air bags · Engine · Fuel / propulsion systemNHTSA 11615881
Electrical system

The sensors on my alarm system will randomly activate, with alarm going off at 30 second intervals. The problem began approximately 6 months ago. I took the initiative to replace my cars battery, along with the battery in my fab. I really thought that solved my problem, as a first step fix. I began once again to identify the sound of my car alarm in multiple parking lots throughout time. I have been investigating this problem, and have read that this alarm problem has been sited by many Mazda 6 owners. I am...

Read the full complaint

the original owner of the 2009 Mazda 6 Grand Touring, and have 67,000 miles driven. I called the Repair Department at my dealership, and was told that it cost $185.00 for just the diagnosis. My auto insurance company policy price is based on using a secured vehicle. Right now I only can leave it unlocked in my garage, otherwise, my vehicle is at risk of being stolen.

Filed Incident Electrical systemNHTSA 11611849
Suspension

This 2009 Mazda 6 hit a chuck hole in the Buffalo NY area, virtually severing the connection between the rear cross member (aka cradle or sub frame) and the right rear wheel and rendering the car all but undriveable. Mechanic said the failure to sufficiently rust proof the subject parts caused severe deterioration of the rear sub frame. This is essentially the same problem that led NHTSA to issue a recall on this vehicle for the front engine cradle in 2018.

Filed Incident SuspensionNHTSA 11605498
Suspension

I noticed a rattling sound that seemed to come from the rear passenger side wheel. I took it to a mechanic who told me that the rear sub-frame was so rusted that the damper had come loose from the sub-frame and caused the rattling sound. He said that he was unable to reattch the damper because the sub-frame was too rusted. The only solution was to remove the loose damper to eliminate the rattling sound and continue driving that way OR have the rear sub-frame replaced which would cost from $4,000-$6,000.

Filed Incident SuspensionNHTSA 11596083
Body, doors & structure

I have a 2009 Mazda 6, the subframe/engine cradle has completely rusted out on the right side causing the lower control arm to detach from the frame while I was driving almost causing a accident luckily I was driving slow at the time. There was a recall for this exact issue, I contacted Mazda and they have no open recalls and can not help me

Filed Incident StructureNHTSA 11590508
SuspensionBody, doors & structure

"What component or system failed or malfunctioned, and is it available for inspection upon request?" - Rear subframe. Total rust through due to improper steel alloy and insufficient paint. Same as happened for the front subframe. Front subframe was recalled as 2818I (Mazda's number) and 19V-323, 18V-631 (NHTSA numbers). NHTSA should also mandate rear subframe be recalled. "How was your safety or the safety of others put at risk?" - Total catastrophic structural failure of rear suspension. Would result in a...

Read the full complaint

total loss of control while driving. This would likely lead to a severe, possibly fatal accident at-speed. "Has the problem been reproduced or confirmed by a dealer or independent service center?" - As reported by independent service center. "Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others?" - no, this exact vehicle has not been inspected by manufacturer. Manufacturer is doubtless aware of the issue. A cursory google search leads to dozens of identical cases. "Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear?" - there were no warnings of the failure prior to discovery by service center.

Filed Incident Suspension · StructureNHTSA 11581728
SuspensionBody, doors & structure

I took my car to the mechanic for some routine maintenance and they called to tell me they discovered that the rear subframe is completely corroded. They say the car is not safe to drive, as it could come apart at any moment, and it will cost so much to repair (current estimate is $8000 and still climbing!) that it may be better for me to buy a new car (which I cannot afford). The mechanic expressed shock at how badly the subframe has deteriorated. He said it is in much worse shape than the rest of the car,...

Read the full complaint

which I have always maintained carefully. In 2019 my car was recalled for a defective front cross-member, which the dealer replaced. I was told at the time that it was recalled because the coating applied to it was defective and did not protect the part from corrosion. Based on my research, it seems that the same defective coating was applied to the rear subframe, and that it is why it has rusted so quickly and severely. I see that the NHTSA is already aware of this issue - [[redacted]] . The exact problem I am having is described in [[redacted]] : "Mazda6 owners told NHTSA there was severe corrosion of the right rear subframes that caused the steering rack mounting bolts to fail." It is completely unacceptable that Mazda replaced the defective part in the front but has not replaced the similarly defective part in the rear, which has failed for the same reason. I am furious that this has made my beloved car, which is otherwise in very good shape and runs beautifully, undriveable. Mazda should be required to repair this severe safety defect, which is entirely their responsibility! Thank you for your time. I look forward to hearing from you at your earliest convenience. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Incident Suspension · Structure · Unknown or otherNHTSA 11577381
Suspension

Purchased the vehicle, brought it to our mechanic. Was told that the rear subframe was completely rusted, making it unsafe to drive.

Filed Incident SuspensionNHTSA 11575034
Suspension

Purchased the 2009 mazda6 for our daughter. Brought it to our mechanic for an electrical issue. We were told that the rear subframe was completely rusted and that the vehicle was unsafe to drive.

Filed Incident SuspensionNHTSA 11572967
Suspension

the front crossmember rusted out and broke while driving down the road (per owner), all bolts needed replaced along with the rear engine torque strut mount. Confirmed and replaced by an independent shop 01/20/2024. upon inspection the rear crossmember, lower control arms, bolts, and other parts are all rusted and ready to break at anytime. front crossmember is at the shop for inspection. Car can easily be at shop on a lift for inspection. No warnings.

Filed Incident SuspensionNHTSA 11567834
SuspensionCrash

Both my back and front chassis are completely rusted through and it's a complete screwed car. Looking online there is a recall on something like this but not for my model? All I see online is people talking about how they had to scrap their cars because of this issue. The salt and snow has ruined this car and so many people have complained to no avail.

Filed Incident SuspensionNHTSA 11564706
Suspension

The contact owns a 2009 Mazda Mazda6. The contact stated the vehicle was taken to an independent mechanic for the replacement of the headlights, and the mechanic discovered that the rear suspension was rusted and corroded while the vehicle was on the lift. Additionally, the passenger's side rear spring was detached. The mechanic advised the contact that the vehicle was unsafe to drive. The rear suspension needed to be replaced; however, the vehicle was not repaired. The manufacturer was notified of the failure and stated that the vehicle was not included in a rear suspension recall for corrosion and a case was not opened with the manufacturer. The approximate failure mileage was 138,000.

Filed Incident SuspensionNHTSA 11562049

Mazda MAZDA6: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
201323410BrakesA
2012100652AirbagsC
2011136681SuspensionC
2010225952Body, doors & structureD
20093861083Body, doors & structureF
20081115152AirbagsC
20071656152AirbagsD
20061936141AirbagsD
20051536125AirbagsD
All MAZDA6 years

2009 Mazda MAZDA6 vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2009 Mazda MAZDA6? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2009 Mazda MAZDA6

Does the 2009 Mazda MAZDA6 have any recalls?

Yes - NHTSA lists 10 recalls for the 2009 Mazda MAZDA6: inflator module (October 2019); control arm (September 2018); inflator module (January 2018); inflator module (July 2017) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2009 Mazda MAZDA6?

By the complaints owners filed with NHTSA, the most common problem areas are the body, doors & structure (130), suspension (76), airbags (75).

How many complaints has the 2009 Mazda MAZDA6 had?

386 complaints have been filed with NHTSA, the first on March 1, 2009 and the latest on July 16, 2026. Of these, 8 describe a crash and 3 a fire, and together they report 5 injuries and 0 deaths.

Is the 2009 Mazda MAZDA6 a reliable vehicle?

Its Safety Index is 17 out of 100 (grade F: far more problems than a typical Mazda MAZDA6 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Mazda MAZDA6 years have the most complaints?
What should I do if my 2009 Mazda MAZDA6 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience