Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Steering

Mazda MAZDA6 Steering problems by year

139 complaints filed with NHTSA about the Mazda MAZDA6's steering. Loss of power steering, stiff or loose steering, wandering, column and rack problems.

Steering complaints by model year

YearSteering complaintsCrashesInjuriesRecalls
20191000
20181000
20167331
20153100
20149220
20131000
20124000
201117100
201029000
200936000
20084200
20078110
20067210
20051000
20044100
20037100

Steering recalls

Latest MAZDA6 steering complaints

2016 Mazda MAZDA6SteeringElectrical system

All of the warning lights on my dashboard light up and beep sporadically. The vehicle stalls when I blow the horn or use the left turn signal, which is extremely dangerous on the freeway. The power steering occasionally fails. I took the vehicle to two service shops to have a diagnostic run and they both said that the code indicated that I would have to take the vehicle to the dealer. I checked the NHTSA website to check for recalls using my year, make and model. I found the NHTSA campaign number 17V-546 and the...

Read the full complaint

Mazda recall number 1517H, which accurately describes the issues that I am having with my vehicle. I took the car to a Mazda dealership and the service manager informed me that they could not repair the recall because my VIN number was not included in the original recall. I am hoping that Mazda will make the necessary repairs because this is a major safety issue.

Filed Incident Steering · Electrical systemNHTSA 11776856
2011 Mazda MAZDA6SteeringSuspension

The frame rusted through and broke where the lower control arm attaches on the passenger side. This caused an immediate pull to the right and nearly caused a wreck. The car was towed to a local mechanic shop who reported the problem. Mazda is currently not taking responsibility for this even though it was a known issue and a recall was issued for this exact issue.

Filed Incident Steering · SuspensionNHTSA 11775340
2018 Mazda MAZDA6SteeringSuspensionAcceleration & cruise control

Got error message that said "Forward Smart City Brake Support Malfunction" slso fot "smart brake malfunction" while driving. The ac stopped, the car speedometer kept going from 50 to zero. The car died and couldn't open doors, windows. Lost steering while driving. We were able to get off road and restart and fine for 2 weeks. While at still light tonight, the car turned off. Windows were up, couldn't open door, emergency blinkers would not come on. This is very dangerous.

Filed Incident Steering · Suspension · Vehicle speed controlNHTSA 11753644
2011 Mazda MAZDA6SteeringSuspensionBody, doors & structure

2011 Mazda6 A serious safety defect occurred on my vehicle and matches NHTSA Recall 19V-323 / Mazda Recall 2818I (front cross member corrosion due to insufficient coating) despite this recall not being associated with my VIN. Front cross member cracked due to rust, causing loss of steering control, wheel misalignment, and scraping from the front wheel. This is exactly the failure described in the recall (breakage of the cross member and reduced steering control, increasing the risk of a crash). My safety and the...

Read the full complaint

safety of others were put at risk. Although my VIN is not currently associated with the recall, all conditions of the recall apply to my vehicle: -2011 Mazda6 within the affected production range -Defect is a manufacturing issue (insufficient paint coating) -Vehicle was registered in Missouri from 2023-2025, which is a listed state The only reason this recall was not associated with my VIN is because the vehicle was not registered in Missouri at the exact time of the 2019 recall campaign. This is an administrative gap, not a safety distinction. It should not be allowed to limit a manufacturer safety defect to specific states. Vehicles move across state lines constantly. A defect that causes loss of steering control does not stop being dangerous when a car crosses a border. Registration records alone did not reflect actual vehicle use or risk. If recalls are state-limited, manufacturers and NHTSA must continue tracking registration changes and associate the recall with the VIN as soon as a vehicle becomes registered in an affected state. Rust is progressive and age-related. Since this recall began in 2019 and it is now 2026, affected vehicles are more likely to experience failure, and many are now registered in different states than they were in 2019. I am requesting that NHTSA associate Recall 19V-323 with my VIN, investigate the adequacy of state-limited recall tracking, and take action to prevent this known safety defect from causing additional crashes.

Filed Incident Steering · Suspension · StructureNHTSA 11713263
2011 Mazda MAZDA6Steering

Alignment is off. Recall for my type of call for the control arm weakening and causing wheel alignment problems. Why isn't mine part of recall??

Filed Incident SteeringNHTSA 11666615
2010 Mazda MAZDA6SteeringBody, doors & structure

The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently veered to the left. There was no warning light illuminated. The contact stated that the vehicle became difficult to steer. The vehicle was taken to an independent mechanic where it was diagnosed and determined that the engine cradle had failed and was severely rusted and needed to be replaced. The vehicle was not repaired. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 114,000.

Filed Incident Steering · StructureNHTSA 11649768
2006 Mazda MAZDA6SteeringSuspension

The front beam crossmember sub k frame of this vehicle has failed due to corrosion. This has resulted in a loss of steering control. Fortunately his failure was discovered while the vehicle was parked or it could have resulted in a very serious vehicle accident. There was an acknowledgment (and recall) of this corrosion failure issue issued by Mazda but it was for a subsequent model years. I contacted Mazda regarding this very dangerous issue and they denied any responsibility.

Filed Incident Steering · SuspensionNHTSA 11584118
2011 Mazda MAZDA6Steering

Bought. A 2011 Mazda 6, and took it to a Mazda dealer for an inspection. They found the rear sub frame ie rear cradle to be extremely rusted out, the shocks on both side are detached, and the springs look like they may push through at any point and do more damage. The car is unsafe to drive and the dealer estimated a repair cost or $4322.99 to fix.

Filed Incident Steering · Unknown or otherNHTSA 11570961
2011 Mazda MAZDA6SteeringSuspension

Turning onto a road, heard a loud thud from the front passenger corner. Car steering became highly erratic. Parked the car, noticed the front passenger wheel was crooked. Took it to the nearest shop and they said the crossmember was rusted completely through and snapped, causing the control arm to lose control. Found out there is a recall for the car model and year for this exact issue, but my car wasn't covered by it, so I did not receive notification of it, but it clearly affects this VIN as well.

Filed Incident Steering · SuspensionNHTSA 11559875
2011 Mazda MAZDA6SteeringSuspensionBody, doors & structure

I purchased a used vehicle in NH from a private seller "as is", repaired tires and brakes, passed MA state inspection and dropped the car off to address the recall, which I had researched via a VIN number search. The dealership informed me that the body had corroded beyond repair, and they cannot perform the required repair for the recall. While the dealership has been helpful, this looks like a major underlying manufacturing flaw for a vehicle at 115K built in 2011.

Filed Incident Steering · Suspension · StructureNHTSA 11533800
2016 Mazda MAZDA6SteeringCrash

I was on freeway when some warning start showing on dashboard ( enging, track control system, battery) then my steering wheel was hard that I couldn't manubrio i hit a curb that was on the entrance and my car start spinning in circles till i hit the hill on side road.

Filed Incident SteeringNHTSA 11531004
2010 Mazda MAZDA6SteeringSuspensionWheels & tires

While im driving the steering is shifting to the right and seems lower on right side. My tires daily need to have air in them because of the uneven weight. While I drive and let go of the gas the car pulls back like an E brake could be stuck not sure though. No accidents at all but it seems like the vehicle is getting weaker and weaker with the uneven weight going down on the tires and steering seems like it's going to crash onto the right without being able to control it.

Filed Incident Steering · Suspension · WheelsNHTSA 11526861
2012 Mazda MAZDA6Steering

I was driving down the road when my steering, suddenly and with out warning began pulling very hard to the right and the steering wheel began turning to the left. My car made loud noises when I tried to straighten out the steering wheel and when I tried to turn. Its also appeared to be rubbing on the inside of the wheel well. Further inspection revealed that the support where the control arm is connected to the frame had torn away from the frame due to oxidation. There is significant oxidation on the frame and there are large areas that no longer appear to be solid.

Filed Incident Steering · Unknown or otherNHTSA 11518399

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience