- The problem
- Certain delphi fuel pressure regulators, p/nos. Fp10020-11b1, fp10026-11b1, and fp10027-11b1, sold after january 9, 2007, as aftermarket equipment for various passenger vehicles listed above. The universal pressure regulators (upr) were produced without an o'ring and retainer.
- The risk
- FUEL MAY LEAK, POSSIBLY RESULTING IN A FIRE.
- The fix
- Delphi will notify owners and replace the upr free of charge. The recall began on april 23, 2007. Owners can contact delphi at 877-411-8770.
Vehicle safety record
1991 Oldsmobile Cutlass Problems, complaints & recalls
No owner complaints about the 1991 Oldsmobile Cutlass have been filed with NHTSA. It is covered by 8 recalls, the latest in March 2007 for the pressure relief devices.
NHTSA data checked
DMore problems than a typical Cutlass year, for its age
- Complaints
- 0
- Recalls
- 8
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
1991 Oldsmobile Cutlass recalls 8
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (To see the school bus engine sizes, click on "document search" and then "bus applications"). The connector on the fuel filter was not manufactured to honeywell's specification. As a result, the o-ring may not seat correctly on the fuel line.
- The risk
- This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. In the presence of an ignition source, a fire could occur.
- The fix
- Honeywell will notify owners and replace the fuel filters free of charge. The recall began on october 18, 2006. Owners may contact fram customer service at 1-800-890-2075 (option 1).
- The problem
- Vehicle description: passenger vehicles originally sold or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia, where road salt use is heavy. A condition where one or both front engine cradle bolts can pull through the retainers due to corrosion of the retainers.
- The risk
- If both bolts pull through, the front of the cradle would no longer be supported at the mounting locations and the steering intermediate shaft could separate from the steering gear.
- The fix
- Dealers will replace the front and rear frame/cradle bolts and retainers.
- The problem
- Vehicle description: passenger vehicles and mini vans originally sold or currently registered in the following states: connecticut, illinois, indiana, maine, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont and wisconsin. The rear cradle bolts pull through the retainers due to corrosion of the retainer. If both bolts pull through, the rear cradle would not longer be supported at these mounting locations and the steering intermediate shaft can separate from the steering gear.
- The risk
- If this were to occur while the vehicle was in motion, a vehicle crash could result.
- The fix
- Dealers will replace the rear cradle bolts and retainers.
- The problem
- These vehicles were assembled with rear outboard safety belt anchorages that may not withstand the required load. This does not comply with fmvss no.210, "Seat belt assembly anchorages."
- The risk
- Consequence of non-compliance: in a collison, stress can cause the attachment metal to tear and allow the anchorage to separate from the body of the vehicle. The safety belt may not protect an occupant in the event of a vehicle crash.
- The fix
- Dealers will replace the existing anchor bolts with a new shoulder bolt and thread locking adhesive. Additionally, noise control patches will be applied at each anchorage.
- The problem
- The power seat or recliner wiring harness can be pinched or can chafe on the seat frame or spring support rod, wearing through the wire insulation and causing an electrical short.
- The risk
- The high current caused by the electrical short welds thecircuit breaker elements together in the closed position, leaving the circuitunprotected and generating sufficient heat to burn the wire insulation andignite the seat cushion material.
- The fix
- Repair any abraded wiring and reroute the wiring harness using a wiring harness clip.
- The problem
- Moisture can enter the express-down electronic control module and cause a short circuit that causes window operation without operator control, and leaves the window in the down position.
- The risk
- The electronic control module will fail from overheatingand could result in a fire hazard inside the door panel.
- The fix
- Replace the window express-down electronic control module.
- The problem
- The front door shoulder belt guide loops may be cracked and are not in compliance with fmvss 208.
- The risk
- The seat occupant faces increased risk of injury in theevent of a sudden stop or accident.
- The fix
- Install reinforcing plates on the cracked shoulder belt guides.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 1991 Oldsmobile Cutlass yet
Oldsmobile Cutlass: every year compared
All Cutlass years1991 Oldsmobile Cutlass vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 1991 Oldsmobile Cutlass | 0 | 8 | D | |
| 1991 Oldsmobile Cutlass Ciera | 197 | 0 | F | Compare |
| 1991 Oldsmobile Cutlass Supreme | 197 | 0 | F | Compare |
| 1991 Oldsmobile 98 | 50 | 2 | F | Compare |
| 1991 Oldsmobile Bravada | 45 | 3 | B | Compare |
| 1991 Oldsmobile Silhouette | 37 | 3 | C | Compare |
| 1991 Oldsmobile 88 | 17 | 2 | F | Compare |
| 1991 Oldsmobile Custom Cruiser | 6 | 3 | F | Compare |
| 1991 Oldsmobile Toronado | 4 | 1 | C | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 1991 Oldsmobile Cutlass
Does the 1991 Oldsmobile Cutlass have any recalls?
Yes - NHTSA lists 8 recalls for the 1991 Oldsmobile Cutlass: pressure relief devices (March 2007); fuel system, gasoline (May 2006); structure (July 2000); structure (April 1997) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 1991 Oldsmobile Cutlass had?
None have been filed with NHTSA so far.
Is the 1991 Oldsmobile Cutlass a reliable vehicle?
Its Safety Index is 39 out of 100 (grade D: more problems than a typical Oldsmobile Cutlass year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Oldsmobile Cutlass years have the most complaints?
1998 (163), 1997 (140), 1989 (113). See every Oldsmobile Cutlass year compared.
What should I do if my 1991 Oldsmobile Cutlass has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data