2018 Ram 2500 Steering problems

The steering column-mounted gear shifter on my 2018 Ram 2500 is experiencing a severe Brake Transmission Shift Interlock (BTSI) failure. Initially, the shifter became locked in the Park position and would not shift out of Park even with the brake pedal fully depressed. Subsequently, the shift interlock mechanism failed in the opposite direction: when placed into Park, the shifter will not stay locked in Park and can move out of Park without pressing the brake pedal, creating an immediate unintended vehicle rollaway...

NHTSA recall number 24V-896 was marked as completed on my vehicle but I'm telling you the work was never done. It was marked as complete on 27 September (that's a Sunday) of this year. I called Stellantis recall department and they just say it's complete but can't tell me who actually did the work or who completed it, just totally stonewalled me, so I'm contacting you. I haven't even been to a dealership in about 10 months for anything. This was either accidentally marked complete or fraudulent, I don't know, but this recall should still be listed as open for my truck. What do I do?

The contact owns a 2018 Ram 2500. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 19V021000 (STEERING); however, after taking the vehicle to a dealer for a tire replacement, the contact was informed by the dealer that the wheels could not be aligned because the drag link assembly failed to meet manufacturer specifications, and that the entire assembly needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 40,000.

The Hydro Boost Pump Port Tube Assembly (Mopar P/N 04581758AA / 4581758AA) on my 2018 Ram 2500 6.7L Cummins has failed and requires replacement. My concern is that this component is part of the hydraulic assist system supporting critical steering/braking functions. A failure or loss of hydraulic pressure could result in significantly increased steering or braking effort and create a serious safety hazard, particularly while towing, carrying a load, or traveling at highway speeds. I am requesting NHTSA review this component and determine whether similar failures have been reported on Ram 2500 vehicles and whether further investigation or manufacturer action is warranted.

The contact owns a 2018 Ram 2500. The contact stated that the vehicle experienced excessive and premature front tire tread wear. The vehicle was taken to Discount Tire, and the contact was informed that the front-end alignment mechanism was welded, which prevented an alignment from being performed, which caused the premature tread wear. The technician associated the failure with NHTSA Campaign Number: 19V021000 (Steering). Additionally, the contact stated that the ABS warning light illuminated, followed by a...

The truck started with a death wobble in the steering. Ball joints,bushing,stabilizer bar replaced front end work was done. Brought to the dealership approx 4 times for the same steering problem. It still has a small wobble pulling to the Rt or left. Steering was very loose but has been tightened up with a replaced steering shock. But the steering wobble continues had the steering gear box replaced twice. Dealership does not know how to fix the problem.

The recall for the HBC unit listed under NHTSA recall #24V-896 is a serious safety concern and causes daily issues driving the vehicle. Without a load in the bed the rear-end is very light so the tires spin easily with the loss of traction control associated with this recall. Also during the rain the truck is almost undriveable due to the frequent tire spins while barely using the throttle.

The contact owns a 2018 Ram 2500. The contact stated that while driving at 40-45 MPH, the brakes and steering became inoperable, causing him to crash into an unknown vehicle. The air bags in the other vehicle did deploy. There were no reported injuries, air bag deployments, or fire for the contact's vehicle. A police report was filed. The traction control and ABS warning lights illuminated. The local dealer was contacted, where it was diagnosed that the failure was related to the HCU and ABS control unit/NHTSA...

Subject: Safety Defect / Recall Not Properly Completed - 2018 Ram 2500 Steering Drag Link Vehicle: 2018 Ram 2500 VIN: [[redacted]] Recall Campaign: 19V-021 / V06 - Steering Drag Link Jam Nut Complaint Description: I am filing a safety complaint regarding a potential unresolved defect on my 2018 Ram 2500. This vehicle was included in Recall 19V-021 / V06, issued to address a safety issue where the steering drag link jam nut may loosen, potentially resulting in loss of steering control. The dealership claimed...

ABS system doesnt work. no update on recall c4b. have had this issue since 2023

My VIN had the steering recall performed, but the welded drag link, which was the "remedy." At the time, it prevents alignment. The vehicle is now non-serviceable. I called Dodge requesting authorization for the updated adjustable drag link and alignment under recall remediation, and was told there is nothing they can do. This is incorrect. I called them four (4) times and was hung up on each time. Recall remedy V06 rendered the steering non-serviceable The vehicle cannot be aligned. The steering wheel cannot be centered.

The contact owns a 2018 Ram 2500. While driving at an undisclosed speed, the locking bolts on the steering linkage had damaged the tires. The vehicle was taken to a dealer to be repaired under a related recall. The vehicle was repaired; however, additional failure occurred after the recall repair. The vehicle was returned to the dealer, and the dealer stated the vehicle would not be repaired free of charge. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 157,748. The VIN was unavailable.

The vehicle had multiple unresolved safety defects from the time of purchase. The radio and electrical system never functioned correctly and could not be repaired despite repeated dealer visits. The stabilizer bar failed and fell out while driving, causing loss of steering stability. The vehicle is currently subject to an open federal safety recall for ABS/ESC/traction control loss with no repair remedy available. These defects created a serious crash risk and caused loss of safe use of the vehicle. The manufacturer and authorized dealer failed to repair the vehicle.

The brake system and steering system are affected. Both are subject to open safety recalls that have not been fully resolved. The vehicle is available for inspection upon request. Unresolved brake and steering issues pose a serious safety risk, particularly when driving with my family. A failure or malfunction of either system could result in reduced stopping ability or loss of steering control, increasing the risk of an accident. Due to these unresolved safety concerns, I do not feel safe operating the vehicle. ...

Please add this to complaint number: 11702732 This is a supplemental complaint regarding the same safety issue I previously reported involving Safety Recall C4B on my 2018 Ram 2500 - complaint # 11702732 In addition to the safety concerns and the prior accident I described in my original complaint, the unresolved recall has also caused significant financial harm. I still owe approximately $15,100 on the vehicle and must make a $515 monthly payment. Because the recall remedy has been unavailable for years, I...

The Brake Hydraulic Control Unit (HCU) covered under Safety Recall C4B has been unavailable for several years, leaving my 2018 Ram 2500 with ongoing ABS, traction control, and electronic stability control malfunctions. This defect has already caused an actual accident. In January 2024, during snow conditions, the ABS and traction control failed while I was braking in my driveway. The truck slid uncontrollably and struck a tree, causing over $10,000 in damage that had to be repaired through my insurance. This...

With the vehicle running, regardless of bein parked or in motion, if I turn the steering wheel either Left or Right, the steering wheel kicks back against the direction the wheel is being turned. Having to fight the steering wheel while driving makes it dangerous while driving at highway speeds around corners, curves, etc. Took it into the dealership and they did verified the issue, their report states " Scanned vehicle pulling no relatable DTC's"... "performed further inspection of steering column and steering...

The contact owns a 2018 Ram 2500. The contact stated that the steering wheel was loose, causing the vehicle to wobble while driving over a minor bumpy road surface. The vehicle was taken to the dealer, where it was inspected, and the dealer determined that the welds of the nut to the adjuster sleeve were fractured. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 19V021000 (Steering); however, the failure persisted. Additionally, the contact received notification of NHTSA...

The contact owns a 2018 Ram 2500. The contact stated that while driving at an undisclosed speed, the cruise control function unexpectedly disengaged, and the service ABS and traction control warning lights were illuminated. The contact stated that there was an audible chime during the failure. The contact received notification of NHTSA Campaign Numbers: 24V896000 (Service Brakes, Hydraulic) and 19V021000 (Steering); however, the parts to perform the recall repairs were not yet available. The dealer was contacted...

3c6ur5cj7jg260375

Recall C4B/NHTSA 24V-896 Hydraulic Control Unit ABS. Continual tripping of the ABS warning resulting in loss of ABS, Cruise Control, Traction Control. Each trip give a warning and chiming resulting in nonstop alarms, noise and loss of the above features. It has been a year since the recall, over two years since the first class action and still no remedy to this safety issue. It is time for the NHTSA to sue and obtain a consent order from FCA similar to earlier FCA consent orders to repurchase these vehicles as they are currently unsafe to drive, there is no remedy in sight, and the resale value has plummeted as a result of this recall and lack of remedy.

Recall v06/nhtsa 19v-021. I bought my 2018 2500 ram new in 2019. On 10-10-25 I put my first set of tires on it 37369 miles. After install of tires. I wanted an alignment.Tech took truck to allignment rack and pulled it off real fast. Sales rep told me they could not do the alignment because the drag link was welded. I showed him the qr code in my owners manual which he scanned and said they dont weld on steering components and to take it to the dealer. I did feldman dodge ram and asked the rep. If ram would...

Truck was "repaired" under Recall V06. Drag link/track bar was welded in place, which was supposed to be a temporary fix until parts became available to replace the bad drag link. In Mar of this year, I had the ball joints replaced. Upon repair, my steering wheel was cocked to the left in order to drive straight. Brought the truck back to have that repaired. Service center told me that because the part had been welded, they would have to break the weld, center the steering wheel, and reweld the part. That...

My truck would not start. I found that I could shift the vehicle into gear without the key in the ignition or foot on the brake. It appeared that the truck would not start because it could not tell when it was in park. I had to be towed to a dealership, who discovered that the Shift Interlock Solenoid had failed. There is a previous recall for the same year, make and model of my truck, but did not include my VIN. I feel that this is the same issue for which the recall was issued and mine should be included. I incurred a $640 repair bill.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The ABS and other unknown warning lights were illuminated. The vehicle was taken to a local dealer, who related the failure to the recall; however, parts were not yet available. The vehicle was taken to another local dealer, Sterling Heights Dodge Chrysler Jeep Ram (40111 Van Dyke Ave, Sterling Heights, MI 48313) for a...