Latest vehicle recalls

Vehicle description: heavy duty trucks. An undersized ground wire for the defroster blower motor switch can cause the switch to overheat and fail.

Vehicle description: heavy duty trucks. Incorrect wiring of the instrument lighting dimmer switch can cause it to fail.

Vehicle description: sport utility vehicles equipped with 3.5L engines. These vehicles do not comply with the requirements of fmvss no. 106, "Brake hoses." These vehicles are equipped with noncompliant brake vacuum hoses.

Vehicle description: heavy duty trucks equipped with an optional firewall-mounted circuit breaker. The main cab power and battery power leads were attached incorrectly. This condition can result in the main cab power being unprotected.

Vehicle description: passenger, sport utility vehicles and minivans. The passenger air bag inflator modules were built without the correct amount of generant, which produces the gas that fills the air bag. Some were built with a double load of generant and...

Vehicle description: passenger vehicles. Some left side rear brake hoses were damaged during assembly. Brake fluid leakage could occur.

Vehicle description: heavy duty trucks equipped with air brake haldex automatic slack adjusters, long stroke brake chambers, and dana brakes. The automatic slack adjuster anchor brackets can fail due to fatigue fracture and completely separate, causing the...

Vehicle description: stripped chassis and commercial buses and school buses equipped with hydraulic brakes and automatic transmissions. The misalignment of the brake pedal can cause delayed brake light activation during light braking applications.

Vehicle description: passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.

Vehicle description: transit buses equipped with vanner 60 series battery equalizers. The equalizer could fail to operate properly and cause malfunction of the battery charging system.

Vehicle description: heavy duty trucks equipped with accuride 22.5 X 8.25 15 Tubeless demountable rims, part no. 32051. Certain rims contain a non-fusion area in the butt-weld of the mounting ring. Under certain circumstances, the defect could develop...

Vehicle description: passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.

Vehicle description: motor homes produced on roadmaster chassis. The water pump controller cannot adequately handle current load which can result in overheating of the pump controller.

Fifth wheel trailers. The routing of the liquid propane gas (lpg) line was inadvertently installed in the sidewall of the slideout. If the recreational vehicle is operated with the line improperly installed, there is the risk of premature failure due to...

Vehicle description: passenger vehicles. It is possible that the fuel supply line could leak due to chaffing with the intake manifold and/or the fuel return line could leak due to chaffing with a spring band clamp used to secure a coolant line.

Vehicle description: passenger vehicles equipped with manual transmissions. It is possible that the clutch pressure line could leak in the area of its connection with the clutch cylinder.

Vehicle description: passenger vehicles. The sheathing material on the electrical connection of the heated windshield washer bottle hose could overheat.

Vehicle description: passenger vehicles equipped with cruise control and v6 engines, and built at one of two lines at the kentucky plant. The accelerator cable housing could be deformed at the cruise control actuator-to-throttle body connection. The...

Vehicle description: passenger vehicles equipped with automatic transmissions. A hose manufacturing process allowed the reinforcement yard to breach the inner layer of some automatic transmission hoses weakening the inner wall which could result in...

Vehicle description: passenger vehicles equipped with automatic transmissions. A hose manufacturing process allowed the reinforcement yard to breach the inner layer of some automatic transmission hoses weakening the inner wall which could result in...