Latest vehicle recalls

Vehicle description: certain sport utility vehicles were built with the inflators in the passenger side air bag modules having the wrong amount of generant.

Vehicle description: class 7 and class 8 vehicles. These vehicles do not comply with the requirements of fmvss no. 207, "Seating system," and no. 210, "Seat belt assembly anchorages." Some fasteners used to attach the shoulder belt anchor bracket to the...

Vehicle description: sedan and coupe model vehicles equipped with a bose audio system that had separate speaker amplifiers mounted behind the rear seat back. A transistor in the speaker amplifier could overheat.

Vehicle description: trucks, school bus and motor home chassis, and transit buses equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a...

Vehicle description: motor homes built on freightliner chassis and equipped with caterpillar engines and felsted electronic accelerator pedals. The return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated...

Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation...

Vehicle description: trucks equipped with commercial truck tires that have steel cords in the tire sidewall. The valve stems may have been torn or damaged during assembly and could leak causing sidewall damage.

Vehicle description: passenger vehicles built with an incorrect power brake booster and master cylinder assembly.

Vehicle description: passenger vehicles. Improperly manufactured fuel feed and return hoses were installed in some of these vehicles. The position of the crimp securing the rubber hose material to the steel quick release connection may have been...

On certain pickup trucks originally sold in or currently registered in the following "salt belt" states: maine, new hampshire, vermont, massachusetts, rhode island, connecticut, new york, new jersey, pennsylvania, delaware, maryland, the district of...

Vehicle description: passenger vehicles built with 15" wheels, equipped with an r/t package. Certain vehicles were equipped with an incorrect tire placard. The vehicles were equipped with p195/50r16 tires but the tire placard indicated that the...

Vehicle description: pickup trucks equipped with an anti-lock braking system (abs). Some vehicles may have inadequate clearance between the front tire/wheel and the brake hose/abs sensor wire assembly. During full lock turns, it is possible for the tire...

Vehicle description: pickup trucks equipped with diesel engines. The throttle cable could unravel (fray) or break resulting in loss of throttle control.

Vehicle description: sled bed trailers used to transport snowmobiles manufactured with isus axles between july 1 and september 19, 2000.

Vehicle description: coaches. The transversal radius rod attachment assembly could develop fatigue cracks and eventually fail.

Vehicle description: passenger vehicles equipped with manually-adjustable (non-powered) seats. Certain inner front slide rail latch mechanisms may have been improperly welded.

Vehicle description: passenger vehicles. The brake lamp switch terminals could overheat.

Vehicle description: passenger vehicles equipped with 2.5L v6 engines. The battery cable was misrouted and its attachment to the alternator cable was under-torqued. If misrouted, the cable could contact the power steering line and the insulation could...

Vehicle description: passenger vehicles. During assembly of these vehicles, the lower end of the spindle may not have been inserted completely into the coupling. In such a case, the fastening bolt used to secure the connection may not completely engage...

Vehicle description: motorhomes. The hose supplying liquid propane gas (lpg) to the refrigerator in the slideout of the unit did not have adequate hose "loop" at the extension mechanism. The insufficient amount of hose in this loop could cause damage to...