Air system blockage in the air dryer occurs degrading the moisture removing capabilities of the dryer when the vehicle is operated in a cold environment and moisture accumulates and freezes in the air dryer or in the line between the dryer and the air system...
Updated daily from NHTSA
Latest vehicle recalls
41 recalls announced in the last 30 days. Newest first - each one shows the problem, the risk, the free fix and every vehicle it covers.
The certification label on these vehicles has incorrect tire pressure data. A tire pressure rating of 110 psi was listed for both front and rear tires. The proper tire pressure values are 90 psi front and 80 psi rear.
Covers2001 Freightliner MT
Two bolts attaching the upper steering arm to the front steering axle were not tightened properly.
Fuel seepage can occur at the mold parting line or at the area where the petcock attaches to the fuel tank.
Cracks develop in the wheel mounting surface. If these cracks become severe enough, the wheel will completely separate from the vehicle.
The front outer shoulder belt web sew stop can become stuck in the retractor. The belt can be difficult to pull out of the retractor and some occupants may not be able to fasten the belt.
Some motorcycles were produced without the application of the proper loctite adhesive on the rear brake disc and counter shaft chain sprocket screws.
Covers1995 Ducati 916
The threaded insert which attaches the safety belt catch to the front seat was incorrectly manufactured.
The safety belt webbing guide (b-pillar "d" ring) can break under heavy loads.
The swivel seat assembly attachments between the upper and lower portions are inadequate to insure that the assembly will stay together during normal use. Vibration can cause the attaching bolts to work loose and fall out.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The driver's side air bag was improperly assembled and could cause the air bag warning light to illuminate from increased electrical resistance.