Latest vehicle recalls

Some wagons were assembled with a ja2 rear system instead of the ja3 brake system. These station wagons may exceed the maximum stopping distance required by fmvss 105...

The quick release air valve may contain a valve disc that balloons when the parking brakes are applied and prevent the parking brakes from setting...

Possibility that a new throttle rod end was incorporated in the throttle mechanism during manufacturing. This throttle end uses a nylon bearing material. This bearing may deteriorate under certain conditions restricting throttle rod movement...

Under adverse weather conditions, outer rubber layer of brake hoses may become brittle and develop cracks. Consequence of defect: cracks could...

Certification labels contain incorrect vehicle weight ratings and/or tire and rim size selection data. Correct information is required to inform user of loading capabilities...

Rear spring plates may not have been tempered and are not of the proper hardness value. Consequence of defect: the plates could...

The fuel pump located inside the fuel tank could fail during high ambient temperatures. This failure is caused by bearing tolerances which do not accommodate temperature expansions...

Possible fuel leakage from the engine fuel injection system, particularly in the area of the hose/clip fittings. Consequence of defect: the presence of...

Rear suspension control arm-to-spindle attachment bolts may be subject to fracture during use of car. Consequence of defect: if bolts...

The engine carrier has a faulty weld to the support bracket eyes. Consequence of defect: the weld could...

Change in vendor's production tooling resulted in a fit between the radiator cap and filler neck which may be too loose. Consequence of defect: the loose fit...

Heat shields for the catalytic converter outlet pipes were omitted during production. Consequence of defect: after severe...

Cracks can develop in the oil filter mounting brackets near the bolts that attach the brackets to the frame side member. Consequence of defect: if cracks...

Trucks may not meet the air reservoir volume of 12 times the combined volume of all brake chambers at full stroke as required by fmvss 121...

Wheels may develop hairline cracks in the area of the ventilation holes. Consequence of defect: rims may...

The fuel return hose is of insufficient length and can detach from the fuel pump. Consequence of defect: this could...

Incorrect machining of the seating surface of the wheels where it contacts the hub of the car may prevent the wheels from mounting securely to the hub. This may cause the wheel to break and could fall off...

Brake booster rear shells may have reduced wall thicknesses which could cause the shell to break. Consequence of defect: repeated brake...

Rear seat belt retractors may allow twisted webbing to enter the retractor housing and jam the retractor. Consequence of defect: a jammed...

When frontally impacted into a fixed barrier at 30 mph, as specified in federal motor vehicle safety standard (fmvss) no. 301, The left frame rails of such vehicles may displace inboard, pinching the fuel/water separator canister between the frame...