Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed...
Brakes
Toyota Sequoia Brake problems by year
761 complaints filed with NHTSA about the Toyota Sequoia's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
Brake complaints by model year
Brake recalls
Latest Sequoia brake complaints
Description of the Safety Crash/Informed Incident: Vehicle Information: 2004 Toyota Sequoia (VIN: [[redacted]]) Incident Date: [[redacted]] Location: [[redacted]] Police Agency: California Highway Patrol (Report #:[[redacted]]) Speed at Incident: Highway speeds (~65 MPH) Description of Defect/Failure: Structural mechanical failure leading to sudden, catastrophic wheel separation at highway speeds. Nine days prior to the incident, on [[redacted]], the vehicle underwent a comprehensive brake, rotor, and tire rotation...
Read the full complaint
service at a certified Toyota dealership (Toyota of Chula Vista, Work Order #[[redacted]]). While traveling on the interstate, the right rear passenger wheel assembly completely detached from the moving vehicle. As a result, the wheel flew off crossing several traffic lanes, traveling over a jersey wall on the freeway shoulder, landing into a nearby drainage ditch. The vehicle dropped onto the remaining brake/rotor assembly, generating extreme sparks, causing an immediate loss of braking pressure, and creating an imminent threat of a rollover or multi-vehicle fatal collision. Subsequent post-incident inspection on a maintenance lift revealed that all wheel studs on the right rear hub were completely sheared or stripped off. This indicates a severe technician failure to properly torque the wheel lug nuts to factory specifications during reassembly, or an un-diagnosed structural failure of the wheel mounting components following certified dealer service. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Many things are happening to my truck that's why I am contacting you people to see if I got any callback thank you so much
I own a 2001 Toyota Sequoia SR5, which I purchased new in Colorado and moved to Virginia in 2004. I received a Toyota Limited Service Campaign Program notice in 2013 about excessive corrosion on the frame. Alexandria Toyota inspected the vehicle and applied a Corrosion-Resistant Compound to the frame. They also replaced the spare tire carrier assembly due to rusting. Over the years, I've had mechanics mention the rust on the frame but Toyota never issued a recall on the 2001 Sequoia. In November 2024, the...
Read the full complaint
following dashboard lights remained on while driving: Vehicle Skid Control (VSC) OFF, VSC TRAC and Brake Lights. I took it to Steven's Auto Clinic in Alexandria. They found low brake fluid levels were causing the brake system failure. The brake pipes are leaking due to heavy rust. In addition, rust was destroying the under carriage. The brake system and frame would require extensive maintenance. They warned me NOT to drive the car. They refilled the brake fluid to allow me to take the car home. Reading the Complaints under Structure on the NHTSA website, dozens of customers over the years mention serious rusting on the frame of their 2001 Sequoias. I believe Toyota had a recall to replace the frame on the Tundra but never included the 2001 Sequoia even though it was built on the Tundra frame. I now have a vehicle I can't drive, due to safety concerns, and I can't sell, except for parts. The Sequoia should have been included in the Tundra recall. Toyota needs to be held accountable. I can provide any paperwork for my 2001 Sequoia including the Limited Service Campaign Program notice and the repair order from Stephen's Auto Clinic if necessary. I can also provide the vehicle for inspection.
My vehicle has randomly been flashing vbs/abs/traction control lights. Sometimes nothing happens other than the flashing lights. Other times I'll be driving & when going around a curve my car makes a beeping noise (sounds like the abs noise activated) & I'll feel a pulsing under the brake & hear a grinding sound. It doesn't allow me to brake effectively. Another time I was coming to a stop behind a car at a red light. It was clear as day, roads weren't wet & I couldn't have been going over 10 mph. When hitting my brakes, my steering wheel kind of glided back & forth for a sec and it felt like my tires "floated"in the same motion as wheel until it stopped.
The contact owns a 2004 Toyota Sequoia. The contact stated while driving at approximately 35 MPH, the brake pedal was depressed and went to the floorboard. The contact stated that the check brakes and a traction control warning lights illuminated. The contact stated that the failure was intermittent at first but had become a recurring failure. When Toyota issued a recall for the braking issue, the contact did not receive notices, so the contact called them and was told it was a few selected 2004 Toyota Sequoia...
Read the full complaint
recalled for those who had complained but, it was not broadcasted like that. The contact had taken the vehicle to a local dealer, but the vehicle was not yet diagnosed. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 07E023000 (Service Brakes, Hydraulic). The manufacturer was informed of the failure. The failure mileage was approximately 143,000.
Can not get BSC, TRC engine lights off traction control kicks in and locks steering and brakes . Unsafe can not smog after spending thousands replacing parts
No accident. Just frame issues. If you can. Can I please get a voucher for frame repair. I really like this SUV. Thank you!
After several years of fighting problems with, after braking to a brief stop, the loss of power/abs grinding when accelerating and turning right, now the ABS is completely dysfunctional. Both TRC lights will turn on and usually the parking brake, and when braking at speeds less than 10mph the abs will activate and prevent bring the truck to a stop without pumping them, on dry pavement. When the ABS light turns on, then braking is possible, but all pressure is gone from brake booster and brakes sound like they're...
Read the full complaint
grinding, not like the sound of abs engaging. Very dangerous to drive in snow as front brakes work but drive axle doesn't disengage when the brake pedal is depressed. Regular mechanic won't engage with diagnosing issues as he feels the problem is partly computer malfunction and Toyota won't allow for used part mismatching. ABS/ECU is failed.
Traction control warning lights, VSC warning lights. These lights have been on for 2 years, resulting in check engine light on. I have replaced every sensor possible, fuses, gas cap, and reset the system multiple times but can not get these lights to stay off. Since lights have been on, when driving on a muddy, wet, icy or slippery road way, my steering locks up, the brakes stop working and there is complete loss of vehicle control. All without warning. This is an extreme hazard and very dangerous. This has been on going since 2017 and is still a major problem . It started at around 200,000 miles.
While driving on a curved road, the vehicle made a grinding sound with flashing VSC off and Trac off lights, as it pulled violently to the right and almost ran off the road with my two children in the back seat. This was an extremely scary incident. I 1. While driving on a curved road, the vehicle made a grinding sound with flashing VSC off and Trac off lights, as it pulled violently to the right and almost ran off the road with my two children in the back seat. This was an extremely scary incident. I do...
Read the full complaint
understand that many first generation Sequoia owners have reported similar incidents and that there were no recalls, however, I think this is a serious enough issue that will cost innocent people their lives. I was able to pull a reading from the OBD2 and it says there is a fault with the Yaw Rate Sensor. Please help before this causes someone's death. Thank you!do understand that many first generation Sequoia owners have reported similar incidents and that there were no recalls, however, I think this is a serious enough issue that will cost innocent people their lives. I was able to pull a reading from the OBD2 and it says there is a fault with the Yaw Rate Sensor. Please help before this causes someone's death. Thank you!
Plan road trip Had Vehicle thoroughly. Inspected only to find that the frame was cracked on goth side and all brake lines are corroded. Called several places to get help with this matter, only to have no help at all. Spoke to many people final communication was with [[redacted]] in Tennessee who admitted the prior owner was notified as to the issue I have owned this vehicle for 6 yrs and could not understand why the Prior owner was notified and not I. I find that due to not notifying the correct owner they should...
Read the full complaint
allow me to have this issue taken care of, but they are not cooperating with me I would like to take this matter further and have them accountable for this safety issue and neglect as to contacting the existing owner. reaching out for help Sincerely [[redacted]] [[redacted]] [[redacted]] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
UNKNOWN I'm unsure of what is causing it but it is a very common issue with the 03-04 sequoia. The brake light will come on like on mine and apparently it's a failure in one of the brake components. It's either the brake booster or the master cylinder in most cases is starting to g out. I've done research on this issue and it's a very common problem costing people thousands to get fixed. I feel like if it's that huge of a problem like I've seen with sequoia owners than it's needs to be addressed in a better manner
While driving my 2001 Sequoia SR5 with only 74,750 miles on freeways at speeds between 55 and 65 mph, the SUV's braking system activates unexpectedly and without cause. The VSC check engine lighting and warning sound illuminate. My SUV veered to the right, the steering wheel vibrated, and it went into a skid when the brakes were abruptly engaged, causing it to skid. My SUV abruptly decelerated as if it had lost power. This situation was hazardous for other vehicles who could not tell if they were applying the...
Read the full complaint
brakes due to the absence of visible brake lights to prevent a collision. Fortunately, I responded defensively and avoided collisions with other vehicles and roadside obstacles. This issue is a safety concern; if it occurs at the wrong moment, a tragedy can be avoided. I've seen more than a hundred complaints from other proprietors and a completed NHTSA investigation. Sequoia models from 2001 and subsequent years were recalled for the same issue. Before a life is lost, Toyota must address this issue in all model years.
The contact owns a 2002 Toyota Sequoia. The contact stated while driving at various speeds and depressing the brake pedal, the vehicle made an abnormal grinding sound and hesitated to respond. The contact depressed the brake pedal a second time, and the vehicle stopped. The ABS warning light was illuminated. The contact stated that the failure had been reoccurring while driving and depressing the brake pedal. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed nor repaired. The failure mileage was unknown.
The undercarriage is rotten you help my thanks
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data