Tenneco Automotive (DRiV) is recalling certain aftermarket ball joints for 2004-2007 Toyota Sequoia and 2004-2006 Toyota Tundra vehicles, MOOG part number K80521, K80522, NAPA part number NCP2601633, NCP2601634, ACDelco part number 45D2344, and 45D2345. The...
Suspension
Toyota Sequoia Suspension problems by year
239 complaints filed with NHTSA about the Toyota Sequoia's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
On certain trucks and mini vans, due to possible improper finishing of the front suspension lower ball joint, some ball joints may experience an incidental deterioration of the internal lubrication. This may cause the ball joint to wear and loosen...
On certain sport utility vehicles, due to a manufacturing issue in the front suspension lower ball joint, there is a possibility that the surface of the ball of the joint may have been scratched. The ball joint may eventually experience excessive wear and...
Latest Sequoia suspension complaints
I own a 2004 Toyota Sequoia and have owned it since it was built by Toyota. In 2013 Toyota had a safety recall on the frame for that vehicle because in certain Northern states they are having issues with the frame rotting and braking. I brought my vehicle in May of 2013 and Carlson Toyota in Minnesota inspected. It said that it passed and they installed a corrosion kit. This vehicle has been meticulously cared for over the years and it still looks that way on the exterior and interior. I have always had this...
Read the full complaint
vehicle enrolled in a car wash club so it gets washed almost daily in the winter and has for its entire life. But the frame of this vehicle is to the point now where it shouldn't be driven. It is so dangerously, rotted and breaking apart. I had the vehicle in Florida for spring break and while I was driving it there it was making some weird clunking noises. So I took it to a repair shop and the frame repair shop said that the frame was beyond repair and probably should not be driven. But it was my only vehicle and I had no choice but to drive it back to Minnesota. Since then I've had several issues when taking off and stopping with loud clunking noises, but it is my daily vehicle and I believe that Toyota should do something to fix it or replace it.
My 2003 Sequoia was in the garage for a check on the brakes. I also asked them to check the frame for any rust issues, because I had previously been concerned about it earlier. They reported to me that the car should be off the road because the rust in the frame was so severe. They said they would not put it up on the lift anymore because it could break in half. The stabilizer was barely connected at one end. There were holes completely through the frame at several places. I know from my research that Toyota issued safety recalls for 2003 Sequoia and Tundra vehicles. This an issue that Toyota should repair.
Description of the Safety Crash/Informed Incident: Vehicle Information: 2004 Toyota Sequoia (VIN: [[redacted]]) Incident Date: [[redacted]] Location: [[redacted]] Police Agency: California Highway Patrol (Report #:[[redacted]]) Speed at Incident: Highway speeds (~65 MPH) Description of Defect/Failure: Structural mechanical failure leading to sudden, catastrophic wheel separation at highway speeds. Nine days prior to the incident, on [[redacted]], the vehicle underwent a comprehensive brake, rotor, and tire rotation...
Read the full complaint
service at a certified Toyota dealership (Toyota of Chula Vista, Work Order #[[redacted]]). While traveling on the interstate, the right rear passenger wheel assembly completely detached from the moving vehicle. As a result, the wheel flew off crossing several traffic lanes, traveling over a jersey wall on the freeway shoulder, landing into a nearby drainage ditch. The vehicle dropped onto the remaining brake/rotor assembly, generating extreme sparks, causing an immediate loss of braking pressure, and creating an imminent threat of a rollover or multi-vehicle fatal collision. Subsequent post-incident inspection on a maintenance lift revealed that all wheel studs on the right rear hub were completely sheared or stripped off. This indicates a severe technician failure to properly torque the wheel lug nuts to factory specifications during reassembly, or an un-diagnosed structural failure of the wheel mounting components following certified dealer service. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Turned into a laundromat parking lot and my balljoint snapped and my truck was sitting on the ground on the driver side front. Bent my fender and door also.
2007 Toyota Sequoia frame completely deteriorated and rusted through. I discovered this when brining my vehicle in for the Toyota Airbag Recall when the technician brought this safety issue to my attention. Previous driving had been extremely unstable and buckled when I was on the highway. Since discovering the frame issue, I stopped driving the vehicle. I believe this is a safety issue caused by a defective frame that Toyota is aware of and had issue a past recall for. The Toyota dealer has made a video of the deteriorated frame and has commented that the vehicle is a safety issue.
Frame is rotting out
Front end in rolled shacking. Tires wearing extremely fast and uneven image. Unable to drive
My wife pulled out of a parking lot and there was a loud noise and the vehicle began to shudder violently. Approximate speed was 10 mikes an hour and she was able to stop. The drivers side rear suspension airbag had broken through the lower control arm, and was under the rear driver side tire. It appears some frame members are cracked as well. Had this happened at highway speeds, it may have resulted in a catastrophic accident. Writer contacted Toyota, as I do not recall being notified of their ZH9 frame...
Read the full complaint
replacement program that resulted from a class action settlement, and the rear of the frame is horribly rusted. Vehicle probably would have qualified at that time to be fixed, but am now out of the window. Manufacturers should be made to notify via certified mail, so they know their customers received notifications like this.
To whom it may concern, I recently purchased a 2002 Toyota sequoia. I brought the truck to a local shop for a (overall assessment of the vehicle) since I just Purchased it. The shop owner ( I have their name address if needed). The chassis is rusty and has holes sue to rust. If someone can get back to me It's much appreciated
The contact owns a 2005 Toyota Sequoia. The contact stated while driving 60 MPH the rear of the vehicle lowered and the rear of the vehicle started to bounce, and the suspension warning light illuminated. The vehicle was taken to the dealer and the dealer stated that the suspension system needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 100,000. The VIN was not available.
2005 Sequoia class action, court ordered frame inspection & either repair or frame replacement. Never received notice of class action. Received letter stating vehicle needed to be inspected. Took to Victory Toyota, Canton, MI on Jan 5, 2018. Was told passed inspection & frame needed seal coating, did not have product. Vehicle was taken in multiple times, never completed the process. On May 6, 2019 the vehicle was taken to this dealership, a rental vehicle was provided and they did nothing and on May 21, 2019, noted...
Read the full complaint
the vehicle didn't pass inspection & the campaign had expired! Per service history report from another dealership, on May 21, (the 15th day they had they had vehicle in their possession), they noted the frame did not pass inspection, also noted the repair timeline expired and they did nothing; however, they were paid to do the job they never did. The frame should of been replaced. I have photos from 2016 showing holes in the frame. I took vehicle to two other dealerships, one inspected in fall 2019 & sent 3 photos to Toyota showing the frame rusted holes but stated once Toyota makes a decision, the never change their mind. Second local dealership printed detailed Toyota repair history report showing Victory stated the vehicle did not pass inspection and that the timeline expired on the 16th day they had the vehicle!! The vehicle interior & exterior is in excellent condition but Toyota knowing refused to replace many of the frames, even though they knew the manufacturer had not made the frames correctly. Toyota has tons of money, clearly they don't care about their product or customers safety.
Complete failure and separation of the lower ball joint. Caused the wheel to fall off, damaging the front fender and jamming the front door making the door stuck closed. Fortunate we did not crash into anything and kill anyone. A very close call.
car is not recalled yet the same model year is recalled from 2007, this problem effects my car as well as cars made earlier in the year. The suspension is unstable and joints are worn in many places ball joints and other steering effecting joints. The car makes sudden side movements like the wheel is about to fall off or the tire fell off the time but the tires are properly inflated. Repair estimated are atleast $600 possibly $1200 as it is worn in 2 places The problem is on the passenger side front. The ...
Read the full complaint
car has 114000 miles. There is no recall on this car but other Sequoias made the same year are recalled This is pretty obvious the problem was in the design and not the date of manufacture.
The contact owns a 2001 Toyota Sequoia. The contact stated while driving 15 MPH, the front driver's side wheel bearing fracture causing the tire to detach from the vehicle. The vehicle was towed to the dealer and the front wheel bearing was repaired; however, the failure reoccurred. The manufacturer was not contacted. The failure mileage was 200,000.
Frame deterioration has rendered the rear torque arm incapable resulting in dynamic misalignment of the rear axle. Under acceleration the vehicle veers into oncoming traffic and under deceleration it veers towards the road ditch as the axle shifts about beneath the vehicle.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data