Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Steering

2020 Freightliner Cascadia Steering problems

Owners have filed 2 complaints about the 2020 Freightliner Cascadia's steering with NHTSA - 8% of all its complaints, most recently on February 6, 2023. Loss of power steering, stiff or loose steering, wandering, column and rack problems.

Complaints
2
Recalls
2
Crashes
0
Fires
0
Injuries
0
Deaths
0

Steering recalls for the 2020 Freightliner Cascadia

Steering: connection

23V10500060,604 vehicles affected

The problem
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2021 Freightliner 108SD, 114SD, 122SD, Columbia, Coronado, Business Class M2, and 2020 Freightliner Cascadia vehicles. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm.
The risk
Drag link separation can cause a complete loss of steering control, increasing the risk of a crash.
The fix
DTNA will inspect the drag link taper joint and repair it, as necessary, free of charge. Owner notification letters were mailed April 21, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL967. This recall expands recall number 21V-689.

Steering: connection

21V689000113,085 vehicles affected

The problem
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Classic Cascadia and 2019-2021 Freightliner Cascadia trucks. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm.
The risk
Drag link separation can cause a complete loss of steering control, increasing the risk of a crash.
The fix
DTNA will inspect the drag link taper joint and repair it as necessary, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact DTNA's customer service at 1-800-547-0712. DTNA's number for this recall is FL-900.

Steering complaints

SteeringAcceleration & cruise controlDriver assistance

Multiple safety issues with truck #1 When driving & using cruise control (CC) at 60 mph & truck is at that speed (60 mph) truck is moving from top speed to E coast mode. Immediately RPM is down (from 1250 to 600) & steering wheel is much harder b/c reduced power from engine . Response time for driver to avoid potential hazardous situations on the road (i.e. animals, rocks, trees, etc.) is longer & not safe #2 This problem is related to when truck is in regen. In driving, and when truck is doing regen (visible on...

Read the full complaint

the dash: high temp light/ icon). CC set to (60 mph) when truck is at that speed (60 mph) truck goes to E coast mode. RPM is going down to 600 RPM which is not adequate engine speed to finish regen. With regen interrupted there is a lot of white smoke under the truck and red light for engine shut down is on the dash. There is 30 seconds time to override shut down but at the same time the driver needs to safely park the truck on the shoulder, on a busy highway, with reduced power and steering wheel (600 RPM or no power at all because engine shut down). With high DPF temperature,there is potential for fire (truck,grass,trees ). I am told engine shut down was caused by interrupted regen process. #3 Collision warning is coming with no reason, and can activate active brake, at high speed. Radar malfunction (snow, ice in the front)can cause malfunction to adaptive cruise control, active brake assist, & malfunction other safety features. Combination of malfunction (radar, active break assist, collision warning, IPM [intelligent powertrain management], engine break not engaging) can cause dangerous acceleration for heavy loaded truck. I contacted DTNA (Daimler Truck North America) in regard to these issues & am told in order to solve these issues the truck should be inspected where mechanics and programmers are involved. At the same time I spoke with the company I work for about safety issues with those trucks. You can contact me for further information.

Filed Incident Steering · Vehicle speed control · Forward collision avoidanceNHTSA 11505866
SteeringEngine & cooling

I have had several issues on my new 2020 cascadia. The power steering box had an external leak which resulted in a steering whine. The dealer replaced the steering box with only 24,000 miles on the truck. I also had a road call involving a check engine and stop engine light which resulted in a replacement of a control unit and temperature sensor. I am still trying to get reimbursed for this repair since the truck is still under warranty. There has also been a def issue causing a loss of power

Filed Incident Steering · Engine and engine coolingNHTSA 11309211

Freightliner Cascadia steering complaints by year

Cascadia steering problems, every year

Had a steering problem with your 2020 Cascadia? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience