Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2010 Mazda MAZDASPEED3 Problems, complaints & recalls

Owners have filed 32 complaints about the 2010 Mazda MAZDASPEED3 with NHTSA, most often about the seats & seat belts (18) and the body, doors & structure (5). Those complaints describe 1 injury. It is covered by 2 recalls, the latest in February 2017 for the seats. For comparison, the 2009 has 0 and the 2011 has 5.

NHTSA data checked

FFar more problems than a typical MAZDASPEED3 year, for its age

#176 most complained-about 2010 vehicle

Complaints
32
Recalls
2
Crashes
0
Fires
0
Injuries
1
Deaths
0

Most common 2010 Mazda MAZDASPEED3 problems

Share of all 32 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2010 Mazda MAZDASPEED3 recalls 2

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Seats

17V082000173,859 vehicles affected

The problem
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
The risk
If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
The fix
Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.

Structure: hatchback / liftgate

16V644000580,455 vehicles affected

The problem
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
The risk
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
The fix
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.

What owners say

Be the first MAZDASPEED3 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

32 complaints about the 2010 Mazda MAZDASPEED3

Newest first, as filed with NHTSA by owners. Page 1 of 2.

Body, doors & structureEngine & cooling

Tl* the contact owns a 2010 mazda 3. While driving, the vehicle stalled without warning and the steering wheel seized. The vehicle would stall for two seconds before independently restarting. The contact also mentioned that the dashboard was sticky. The vehicle was not taken to a dealer or an independent mechanic for diagnostic testing. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and informed the contact that there was no recall on the vehicle. The manufacturer provided case number: 12396366785. The failure mileage was approximately 139,000. The vin was invalid.

Filed Incident Structure · EngineNHTSA 11277034
Transmission & drivetrainElectrical systemAirbags

Blinking air bag indicator light shortly after mazda service recall for seat replacement. Mazda dealer refused to diagnose the issue which later found to be loose connector under the seat. Connector was unclipped during assembly of new vehicle bracket and not reinstalled properly. Owner also had u0100 code pending no pcm comm. Referred to ws manual found out loose wire from air bag could've been the problem, but later found moisture under steering column. Led to finding leaking brake master cylinder onto engine...

Read the full complaint

firewall pcm main harness connection/plug. This caused corrosion, poor contact with ground wiring, and vehicle electrical "gremlins". Such as hatchback door indicating 'open' on display upon start with no cause. Restarting vehicle solved that.. Intermittent tcs/dsc flashlight light driving under 10mph in parking lot. Owner also had transmission problems @ 400 miles. 1St and 2nd gear synchro replaced. Later turbo @ 15k miles and again at 40k. Dealerships inexperienced with handling ms3. Might as well have gone to ford since mazda dealers were of no help given "convenience" in mileage. Bad strut bearings at 50k, new struts and shocks at 35k. Engine mount rear at 10k miles. The other 2 mounts failed, driver side and passenger. Passenger mount leaked hydraulic oil on to serpentine belt and pulley tensioner. Come on! When the engine mounts failed, the engine tilted backwards, cracking exhaust, causing misfire and burning up at least 1 ignition coil. I could keep going..

Filed Incident Power train · Electrical system · Air bagsNHTSA 11196097
Lights

Water intermittently leaks into passenger side headlight.

Filed Incident Exterior lightingNHTSA 11124015
SuspensionAirbags1 injury

Tl* the contact owns a 2010 mazda 3. While driving 70 mph, the driver side curtain air bag inadvertently deployed without warning or impact. The contact sustained a minor bruise to the ribs. Medical attention was not required. The vehicle was taken to a local dealer (fairway mazda of savannah 10101 abercorn street, savannah, ga, 31406), but the cause of the failure could not be determined. The manufacturer was notified of the failure and sent out an engineer who determined that the vehicle had front passenger side suspension damagae, which caused the air bag deployment. The vehicle was taken to an independent mechanic and was repaired. The failure mileage was approximately 63,000.

Filed Incident Suspension · Air bagsNHTSA 11015673
Seats & seat belts

While driving, the swing arm which attaches the adjustment bar under the driver seat cushion to the left seat slider broke. The seat rocks freely approximately 1 foot, making the seatbelt useless and the car could not be driven safely. I had to remove the seat and re-weld the swing arm. The dealer solution would be a complete seat replacement costing $900. Mileage: 71000

Filed Incident SeatsNHTSA 10954913
Seats & seat belts

Drivers side seat became loose. When sitting down in the car a loud cluck was heard and the front driver seat moved backward. Upon inspection the weld holding the seat to the bracket had snapped. Car was stationary at the time been rendered un-drivable due to the movement in the seat.

Filed Incident SeatsNHTSA 10949697
Seats & seat belts

Drivers side seat broke at welded attachment point to adjuster rail. My son's driver seat was rocking, I thought that the locking washer had fallen off and went to replace, when I removered the side cover I discovered that the bracket that attached the seat to the adjuster frame had broken. Search the web and discovered that this was a common issue with the mazda 3. When to dealer and discovered that I had to replace the whole subframe which cost $300 for the part and $300 for the labor to install it. Mazda needs to do a recall and fix this issue before someone gets hurt and also reimburse everyone who had to replace the poorly constructed part

Filed Incident SeatsNHTSA 10946271
Seats & seat belts

I was driving my 2010 mazdaspeed 3 on 10/20/2016. Driving home from work I suddenly realized while accelerating it was like sitting in a rocking chair. After being able to check it later that night I looked up under the seat and the brace that holds the seat frame to the seat track has completely sheered off on the left hand side. The right side is still in tact... For now. Reading online it seems the dealerships are wanted around $700 to replace this. I don't feel as though I should be responsible for such a...

Read the full complaint

high bill on a huge safety concern. If I get into an accident what's to keep my seat from completely launching and impaling me into the steering wheel. Mazda please step up and take care of this problem. To make an added note, my seat has had a slight rock in it for from what I can remember being at least 2-3 years now. Talk to someone about it when I first noticed it and they say that's normal and do nothing about it. So, clearly if this is normal for mazda, then there is going to be a lot more problems coming out of the woodwork. *Tr

Filed Incident SeatsNHTSA 10917786
Seats & seat belts

When accelerating from stop or making turns on the street or on a curved highway, my driver's seat reclines back from the base of the seat approximately 3-4 inches. It's been repaired (washer and nuts replaced) several times over the past 3 years. Took it in today (10/17/2016) and was told that I needed a new seat track assembly ($500.00 Parts and labor). There are numerous complaints for this model vehicle about the same situation for their 2010 mazda 3 and mazdaspeed 3.

Filed Incident SeatsNHTSA 10916607
Fuel system

Tl* the contact owns a 2010 mazda speed 3. While driving 10 mph, there was a screeching noise coming from the vehicle. The contact stated that the noise sounded like two pieces of metal scraping against each other. The vehicle was taken to an independent mechanic who diagnosed that the fuel tank internal baffle was detached and was rubbing against the inside of the fuel tank. The contact was concerned that the failure could spark a flame inside the fuel tank. The manufacturer was not notified and no repairs were made. The failure mileage was 60,300.

Filed Incident Fuel / propulsion systemNHTSA 10899326
Seats & seat belts

Driving along a city street, with my 2 1/2 year old in the vehicle, and the left side of the driver seat bracket broke. I have had this happen before in a previous mazda before, a 2003 protege5. In attached photo, the bracket on the middle-right should be welded on to the bar-section in the middle-left.

Filed Incident SeatsNHTSA 10893671
Seats & seat belts

Vehicle was stationary. Upon sitting in the driver's seat, I heard a "pop" sound. The seat now moves approximately 6 inches fore and aft upon braking and accelerating.

Filed Incident SeatsNHTSA 10875167
Seats & seat belts

After getting into the drivers seat, I heard a loud pop and drivers seat became very loose. Upon inspection, front left bracket for vertical seat adjustment was broken in half. Loose seat would shift during braking and acceleration, an uncomfortable and dangerous situation.

Filed Incident SeatsNHTSA 10820446
Body, doors & structure

I have a 2010 mazdaspeed 3. At only 5 years old the clear coat is already peeling horribly on the hood and now starting on the fenders and trim going along the windshield. I have the velocity red paint and cannot believe the clear coat is peeling this badly within only 5 years. Vehicle is kept under normal conditions.

Filed Incident Structure · Unknown or otherNHTSA 10816382
Seats & seat belts

The front drivers seat started rocking back and forth after hearing a loud crack sound. Closer inspection of the seat in the car revealed that the weld attaching the adjust and the seat failed. Contact mazda and they refused to fix despite noting it in a service bulletin tsb #09-049/10 titled "2010 mazda3 - rattle noise from bottom of driver seat" 2010-11-08. This is a safety issue and could have been very dangerous if driving at the time.

Filed Incident SeatsNHTSA 10810185
Visibility & wipers

Dashboard is melting, the glare from it makes it hard to see traffic up ahead and is very distracting at times. Dealership said it is a comon problem with mazda vehicles, using visors to cover the windshield does not stop the melting. Inside of the windshield is extremely streaky due to the dash melting and oils leaving residue on the windshield.

Filed Incident Unknown or other · Visibility / wiperNHTSA 10807238
Visibility & wipers

Dashboard is melting and turning into a sticky gooey mess that very glossy and creating a large amount of reflective glare. The reflective glare off the dashboard onto the windshield is so bright that it makes it difficult to see out of the windshield on bright or sunny days.

Filed Incident Unknown or other · Visibility / wiperNHTSA 10779454
Seats & seat belts

While driving under typical conditions, navigating a turn at speed, a popping noise sounded from the bottom of the driver side seat. Subsequently, the driver side seat began to wobble, seemingly pivoting at a point in the back, right area of the seat. Further inspection revealed that the seat mount bracket that secures the seat to the frame of the vehicle had broken at the weld. Simple online research reveals that several other consumers have experienced similar issues.

Filed Incident SeatsNHTSA 10777815
Other & unknown

My dashboard has been melting now for the past 2 years. It is getting worse. I live in florida. This is an obvious defect from mazda and they refuse to replace. The melting dashboard causes extreme glare on sunny days. Enough to affect visibility out the front windshield. Since it is literally cooking I am concerned that there are health hazards and toxins associated with it melting. This situation is hazardous and a recall needs to be enforced asap.

Filed Incident Unknown or otherNHTSA 10765326
Seats & seat belts

I was in the vehicle about to back out of a parking spot when I heard a pop and the seat suddenly felt loose. The seat itself will rock back and forth a few inches and generally feels unstable. I looked under the seat and found that one of the 4 seat mounting brackets (connects the seat portion to the seat rails) had broken in half. This bracket has been discolored by heat from the welding process (black at the weld fading to blue/gray and then back to the bronze-type color of the part). The part broke right...

Read the full complaint

where the color fades from blue/gray to the orginal bronze color. A quick google search reveals that this is a recurring problem. I have included several links with owners complaining about this exact same issue. One driver mentions almost colliding with a wall when it broke. I have spoken to both mazda and my local dealer. Both refuse to cover the repair costs. Mazda does not acknowledge the issue as a manufacturing defect. The dealer repair would be an out of pocket cost of ~$1000. I was quoted 2.5 Hours labor and a parts cost of $700 for the seat and frame. The responses I received from mazda and the dealer were disheartening. Obviously I'm not happy about a potential $1000 repair bill to fix the seat, and the broken bracket and wobbly seat represent a serious safety risk. I'm hoping the folks at the nhtsa can help advocate for the consumer and convince mazda that they must acknowledge this rather serious manufacturing defect. Reference links: http://www.Carcomplaints.Com/mazda/mazda3/2010/accessories-interior/broken_seat_weld.Shtml http://www.Reddit.Com/r/mazda/comments/2s51x8/mazda_3_2010_seat_weld_broke/ http://www.Mazdaspeedforums.Org/forum/f436/driver-seat-loose-100964/ http://www.Torontomazda3.Ca/forum/showthread.Php?72586-My-seat-broke http://forum.Mazda6club.Com/mazdaspeed6/209501-broken-seat-frame.Html

Filed Incident SeatsNHTSA 10733031
AirbagsSeats & seat belts

The seat height adjuster is operated by a lever on the side of the seat. The lever rotates a rod with two brackets (one on each side of the seat) which are welded to the bar on one end and pinned to the seat adjuster base. The bracket cracked at the base of the weld on the outboard side of the seat. The failure occurred while accelerating from a stop; however, I had noticed some a rattle or creaking sound from the seat for a few days before the final failure occurred. The seat is not completely loose at the...

Read the full complaint

front left corner. The seat has side airbags. I am concerned that they will accidentally deploy due to the excessive seat movement in a panic breaking event. Mazda has changed the part design, but the repair is not covered under a recall or extended warranty even though a defective seat is a safety issue. The only repair is to replace the seat adjuster assembly or entire seat.

Filed Incident Air bags · SeatsNHTSA 10730490
Seats & seat belts

While driving, I heard a slight pop from under the seat. Upon rounding a curve, the entire driver seat rocked loose 7 to 8 inches sideways. I was able to stop the vehicle and carefully drive back to my home. I discovered that instead of bolts & locknuts, the seat is secured to the seatframe rails with 4 pins (approximately 12mm). The parts are only held together with press-on thrust washers. These washers had popped off. This is a serious safety issue. If I had been driving slightly faster I could have totally lost control & crashed.Updated 07-16-15 *bf updated 9/21/2015 *js

Filed Incident SeatsNHTSA 10725866
Seats & seat belts

While I was entering the freeway I felt the seat moved back I almost got into accident when it happen luckily it didn't happen. I went to a mazda dealership and asked them about the seat they said its not covered by the warranty I have to pay 800 plus labor to fix the seat. The second time it happen I was at the stop light and when the light turn green the seat moved way back and I couldn't reach the gas and the clutch pedal so I stalled in the middle of the street and there was traffic coming, almost got into...

Read the full complaint

accident again. So now I have to hold the steering wheel and move closer to the steering wheel just to reach the gas ,brake, and clutch pedal and that's not the proper way to seat for the drivers if anyone got into accident that close to the air they might suffocate if the air deploy during an accident. Please fix this problem I don't want this to happen this to anyone. I have pictures to prove it. *Tr

Filed Incident SeatsNHTSA 10662092
Seats & seat belts

I was taking a clover-leaf off-ramp when I heard a snap (or pop) and felt my seat rock back about 3 inches with more inches to go back. I took my 2010 mazdaspeed 3 into morrie's minnetonka mazda in order for them to inspect the part that had broken. The washer came loose from the bottom of the driver side seat rail on the left side. The mechanics had reattached the washer, which appeared to be a pressed-on washer, and when testing the seat by rocking in it, the washer fell off again. The recommendation that the...

Read the full complaint

dealership had given me was to purchase a new driver seat rail assembly, which costs $1080.00 + Tax/ss. I had declined to purchase this part, as I don't believe the seat rail assembly is worth that amount, plus I could have purchased a nice set of aftermarket seats like brands bride or sparco. After posting to a facebook group page called "mazda community blog", many other members have posted similar experiences, and have provided many references to other websites that have close to the same issue that I have experienced. It appears to be mostly related to the 2010 mazdaspeed 3 / 2010 mazda 3 years of when this issue has had occurrences. Some other similar issues that others have also had are the welds breaking on the seats, which have a similar effect to what my seat felt like. *Js

Filed Incident SeatsNHTSA 10662068
Body, doors & structureVisibility & wipers

The dashboard of the vehicle has been melting and causing a glare while driving. *Tr

Filed Incident Structure · Visibility / wiperNHTSA 10653443

Mazda MAZDASPEED3: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20133110Seats & seat beltsC
20126110Transmission & drivetrainC
20115200Body, doors & structureC
201032200Seats & seat beltsF
20090100-A
200833112Transmission & drivetrainF
200738210Transmission & drivetrainF
All MAZDASPEED3 years

2010 Mazda MAZDASPEED3 vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2010 Mazda MAZDASPEED3? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2010 Mazda MAZDASPEED3

Does the 2010 Mazda MAZDASPEED3 have any recalls?

Yes - NHTSA lists 2 recalls for the 2010 Mazda MAZDASPEED3: seats (February 2017); hatchback / liftgate (September 2016). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2010 Mazda MAZDASPEED3?

By the complaints owners filed with NHTSA, the most common problem areas are the seats & seat belts (18), body, doors & structure (5), airbags (3).

How many complaints has the 2010 Mazda MAZDASPEED3 had?

32 complaints have been filed with NHTSA, the first on October 18, 2012 and the latest on October 30, 2019. Of these, 0 describe a crash and 0 a fire, and together they report 1 injury and 0 deaths.

Is the 2010 Mazda MAZDASPEED3 a reliable vehicle?

Its Safety Index is 14 out of 100 (grade F: far more problems than a typical Mazda MAZDASPEED3 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Mazda MAZDASPEED3 years have the most complaints?
What should I do if my 2010 Mazda MAZDASPEED3 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience