Chrysler (FCA US, LLC) is recalling certain Ram 2500 and Ram 3500 vehicles equipped with a 3.5" cluster and column shifter. A software error may cause the gear selection display to be inaccurate. As such, these vehicles fail to comply with the requirements...
Transmission & drivetrain
Ram 3500 Transmission problems by year
329 complaints filed with NHTSA about the Ram 3500's transmission & drivetrain. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.
Transmission complaints by model year
Transmission recalls
Chrysler (FCA US, LLC) is recalling certain 2023 Ram 1500, 2500, and 3500 vehicles. An insufficient weld in the transmission control unit can allow transmission fluid to leak on to electrical components, resulting in a loss of drive power or loss of park...
FCA US, LLC (Chrysler) is recalling certain 2020-2023 Ram 2500 and 2020-2022 Ram 3500 vehicles. A build-up of pressure and heat inside the transmission may result in a transmission fluid leak from the dipstick tube.
Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 2500 and 3500 Pickup vehicles equipped with six-speed automatic (68RFE) transmissions. A build up of pressure and heat inside the transmission may result in a transmission fluid leak from the dipstick...
Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in...
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup...
Chrysler (FCA US LLC) is recalling certain model year 2016 Ram 3500 trucks manufactured July 24, 2015, through January 7, 2016, and 2016 Ram 4500/5500 trucks manufactured July 24, 2015, through October 8, 2015. The transfer case may have been manufactured...
Chrysler Group LLC (Chrysler) is recalling certain model year 2012 RAM 3500 trucks manufactured May 4, 2012, through August 7, 2012; and model year 2012 RAM 4500 and 5500 trucks manufactured May 3, 2012, through August 7, 2012. Due to a loose snap ring...
Latest 3500 transmission complaints
I noticed that my gear shift lever was loose. I removed the boot of the shifter and found the 10mm bolt holding the shifter in place finger tight. It definitely would have fell out in a short period of time leaving the driver unable to shift into park or into any other gear. This could have been a very dangerous situation. I tightened the bolt and reinstalled the boot.
ONLY 1,800 MI. I continue to experience ongoing issues with this truck, despite having just received it back from the dealership two weeks ago following repairs related to a rear pinon gear. the truck is now back in the service department for concerns involving the front differential. Given the repeated drivetrain issues, I am increasingly concerned about the safety and reliability of this vehicle, particularly the possibility of a catastrophic mechanical failure while traveling at highway speeds that could result...
Read the full complaint
in loss of control. These ongoing problems have significantly undermined my confidence in the vehicle's safety and dependability. At this point, I am concerned not only about the continued mechanical problems but also about the potential risks to my safety and the safety of others on the road. I believe these concerns warrant serious attention and a resolution as soon as possible.
The contact owns a 2013 Ram 3500. The contact stated that the vehicle became uncontrollable and was difficult to maneuver while driving on the road. The vehicle was taken to a local dealer, where the contact was informed that the part was to repair the vehicle was on back order. While driving approximately 45 MPH, the vehicle crashed into a ditch caused by a failure with the drag link. The contact stated that the shift interlock was fractured, causing the gear shifter to detach while the vehicle was driven. The...
Read the full complaint
vehicle became stuck in park(P). The vehicle was towed to a mechanic and was repaired with an aftermarket part. The contact stated that the dealer had not repaired the vehicle causing the failure. The customer care department was contacted but was unable to assist with the dealer. The contact was concerned that the aftermarket part might not meet the OE standards. The approximate failure mileage was 155,000.
All of my dash board light lit up. I stop the truck turn it off. when I get back in to drive it would not engage the transmission. No reverse No drive and the engine would not shut off. Happened about two weeks ago. the first time what in December, Same problem! they say it just needed a software flash, but if that was the case why would it happen again, and why would they need another software flash ?
Trucks ignition system does not work properly; manufacturer has no way to diagnose the problem. possible fire hazard? drive system, was not built to factory standards, dealer advised to not to drive out of fear of blowing up while driving down the road.
We were pulling camper to Nashville TN. We pulled off I24 toward I65 North. I noticed the engine was raving and it felt like I was missing gears on the transmission. I was roughly 4 miles from my destination when I noticed smoke coming from under the hood on passenger side and flames coming from under hood on passenger side of the hood. I stopped the truck/ camper. Three of us had extinguishers trying to put fire out. The entire engingine compartment burned and fire intruded into driver compartment.
The 2025 and 2026 dually 3500 Ram trucks with the 12" AAM rear axle are having issues with the rear wheel speed sensors (different sensor for each side). They apparently fail or are not able to properly communicate to the computer. When this happens, the following are disabled: -ABS -Auto Emergency Braking -4x4 -Electronic Stability Control -Cruise Sometimes, the engine won't shut off. The gauge cluster will state it can't detect which position the transmission is in. So, you cannot shift, and you can't shut the...
Read the full complaint
truck off, and you can't drive. You are stuck in place with a running engine. Despite Stellantis releasing a new revision of wheel speed sensors (AB revision), they have failed in less than 2,000 miles on my truck. Many, many dually owners are experiencing these failures. My truck has been to 2 dealerships for a total of 5 repair attempts so far.
Started with only 320 miles just days after purchasing this new 2026 RAM 3500 on [redacted]. I have taken the truck to three differ RAM dealerships as this issue continues to occur. [[redacted]]; [[redacted]]; and [[redacted]] Westside all had attempted to fix the issue. I had to return the truck a number of times to [[redacted]] and [[redacted]] for the same reasons. The following warmings messages are displayed: FCW/Cruise Control Unavailable Service Required - occurs when using cruise control, Service...
Read the full complaint
Electronic Stability Control, Auto Emergency Braking (AEB) Unavailable Service Required, Park Sense Temporarily Unavailable, Service Antilock Brake System, 4WD System Temporarily Unavailable, and Service engine light comes on. Two RAM dealers are saying the issue is the speed sensor, which has been replaced over three times. The RAM dealership had to open an engineer ticket with the manufacture, but the issue is not fixed. The Jacksonville service manger told me I can keep bringing the truck in, but until a different manufacture makes a new speed sensor, the truck will continue to have the same issue. I use the RAM 3500 to pull my RV. Brake system failure put myself and family and others safety at risk while on the road, therefore, I do not drive the truck in fear the brake system will fail and I won't be able to stop 20,000 pounds of truck and RV. The truck is available for inspection, but I am currently in the process of returning the truck under Flordia's Lemon Law. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
What component or system failed or malfunctioned, and is it available for inspection upon request? Rear Axle Failure - Dealership has the truck currently How was your safety or the safety of others put at risk? - It was not Has the problem been reproduced or confirmed by a dealer or independent service center? - Yes Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? - yes, by the dealer Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? - No warning of any kind. Just loud grinding noise
Loss of transmission due to Aisin K1 Clutch / Input Shaft failure.
The contact owns a 2022 Ram 3500. The contact stated that while parking the vehicle, the contact unhooked the camper that was being towed and shifted the vehicle to drive(D) but the vehicle failed to move forward or backwards while in reverse(R). The contact associated the failure with NHTSA Action Number: PE24009 (Power Train). The vehicle was towed to the dealer and was diagnosed with transmission failure. The vehicle was repaired; however, the failure persisted. The manufacturer was made aware of the failure. The failure mileage was approximately 46,000.
Front axle disconnect failed at only 15,136 miles
While driving transmission just died would only go in reverse. lucky it happened at midnight so there was no traffic and was able to pull over safely. I drove truck home in reverse has I was only about 1000ft from house. Checked transmission fluid was burnt and all black. there was no warning signs check engine light came on just has it happened. I then ordered a aftermarket transmission and had it installed . When old transmission was sent back for core was told under drive and overdrive clutch packs are welded...
Read the full complaint
together. Was not brought to dealer because warranty was already up. didn't think to keep codes that populated when check engine light came on there was about six all seemed to do with shift solenoids. I am filling this out in case others have had same issue and maybe its a defect seems like low miles for this to have happened.
The contact owns a 2016 RAM 3500. The contact stated that while her husband was driving on several occasions at various speeds, the vehicle lost power and did not accelerate as intended. The vehicle was not diagnosed or repaired. The contact stated that her husband hooked the vehicle up to a handheld diagnostic machine where codes: P003A, P006a, P0046 populated. The manufacturer was notified of the failure. The failure mileage was approximately 74,500.
Grid heater bolt broke while towing our camper and destroyed our engine while traveling through Virginia!
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data