Vehicle description: passenger vehicles equipped with the bi-fuel option fail to comply with fmvss no. 101, "Control location, identification, and illumination." The instrument panel lights in these vehicles are at full illumination levels and cannot be...
Updated daily from NHTSA
Latest vehicle recalls
41 recalls announced in the last 30 days. Newest first - each one shows the problem, the risk, the free fix and every vehicle it covers.
Vehicle description: passenger vehicles. These vehicles have jacking instructions which, if followed, could cause the vehicle operator to place the jack on a frame weld when attempting to raise a rear wheel. If the vehicle is jacked up with the jack placed...
Vehicle description: pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
Vehicle description: pickup trucks. Some vehicles may have been built with inadequate clearance between the rear axle vent hose and the brake hose.
Vehicle description: pickup trucks equipped with 4.7L engine and automatic transmissions. The automatic transmission may expel fluid from the fill tube during normal temperature operation.
Vehicle description: passenger vehicles. Some of these vehicles may have been built with an inadequate weld between the right front brake hose block and the stand-off bracket.
Vehicle description: sport utility vehicles. Some of these vehicles may have been built with fuel tanks with suspect vent tube welds.
Vehicle description: passenger cars. Vapors from the positive crankcase ventilation (pcv) system can condense and freeze inside of the throttle body when the vehicle is operated in extremely cold ambient temperatures.
Vehicle description: pickup trucks built with 2.5L engines. Some vehicles may have been built with inadequate clearance between the left front brake tube and the power steering hose.
Vehicle description: refrigerated vans with bustin pullout truck/trailer ladder part nos. De1903-a and de1905-a. The cross bar that supports the step fails when welds that attach it to the square tube side supports fail.
Vehicle description: passenger vehicles. Manufacturing changes were made to the orvr spring force and float wire length reducing the valve angle. Certain valves caused fuel shut off before the tank reached 95% of nominal capacity.
Vehicle description: passenger vehicles. The rear suspension lower arms and/or control arms could break due to improper welding.
Vehicle description: school buses built on ford or chevrolet cutaway van chassis equipped with the rosco "euro-style" overhanging right hand rearview mirror. These mirrors have an inadequate strength attachment at the mirror brace mounting point and could...
Vehicle description: passenger vehicles originally sold or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio...
Vehicle description: heavy duty trucks equipped with accuride 22.5 X 8.25 15 Tubeless demountable rims, part no. 32051. Certain rims contain a non-fusion area in the butt-weld of the mounting ring. Under certain circumstances, the defect could develop...
Vehicle description: non-abs equipped passenger vehicles. The brake master cylinder piston retainer snap ring may have been bent inward during the assembly process. The master cylinder piston may be in a "brake applied" position due to the damaged piston...
Vehicle description: class a motor homes, models 3602 and 3500. The 120-volt circuit ground wire that provides bonding from the power center and the generator transfer switch to the frame was incorrectly connected to the 12-volt ground bar.
Vehicle description: passenger vehicles. The protective rubber boot which covers the ball joint connection between the windshield wiper motor drive arm and the windshield wiper drag link can stick to the surface of the drive arm. If the rubber boot sticks...
Vehicle description: heavy duty trucks. The side fairing hinge bar and mounts can detach from the fuel tank straps. The hinge bar can rotate and separate from the fairing, allowing the hinge bar assembly to fall off of the vehicle.
Vehicle description: mini vans. The dimmer control for the instrument panel lights can fail.