Latest vehicle recalls

Vehicle description: school buses with or without seat belts equipped with between the frame rail fuel tank option and 39 and 45 inch anchor passenger seats (seat belt ready seats). These buses were built without the under floor reinforcement plate on the...

Vehicle description: 4-door sport utility vehicles equipped with side air bags. The subject vehicles have a revised level side crash sensor that could deploy the side air bag if the ignition key is in the "run" position and the seatbelt webbing is forcibly...

Vehicle description: motor homes equipped with granning air suspensions. A fracture can develop at the attachment point of the cross member/bell crank and idler arm housing.

Vehicle description: sport utility vehicles. One or both of the bolts that retain the brake caliper to the axle may have missed a final assembly torque operation. Consequently they may be loose or possibly missing.

Vehicle description: school and heavy duty trucks built with bendix air abs. The abs sensor wires on rotating parts chafes which can lead to a false signal being sent to the bendix abs electronic control unit (ecu).

Vehicle description: passenger vehicles. Corrosion of the air bag inflator's internal wiring, which can occur over time, could cause the inadvertent deployment of the driver's air bag. This deployment could occur during vehicle start-up, while the vehicle...

Certain school buses with weldon technologies' 5050-1400 surface mount marker lights have an option to replace each of the twelve clearance/marker/identification lights with four-candlepower lights, twice the candlepower normally used. The higher current...

Vehicle description: 1999 and 2000 motor homes manufactured between april 2 and november 20, 1999, and equipped with abs systems with brake wiring harness part #2505168. The electrical connector which connects to the modulator was mis-wired causing the...

Vehicle description: class c motor homes constructed on chevy chassis. The routing of the main battery feed wiring from the coach battery to the distribution panel of the motor home. The coach battery is not the engine battery. The coach battery provides...

Vehicle description: 23' travel trailers. The design incorporates all of the liquid storage tanks behind the axle, so that when the tanks are full or other materials are improperly loaded, trailer hitch weight is reduced.

Vehicle description: mini vans, light pickup trucks, and sport utility vehicles. Off lease canadian vehicles equipped with daytime running lights which meet canadian requirements and not the photometric requirements of fmvss 108, "lamps, reflective devices...

Vehicle description: mini vans. These vehicles may have incorrectly fuel line end forms which could result in a lower than specified pull apart force for the installed fuel line connection.

Vehicle description: motorcycles. The rear shock absorber can break, dragging the underside of the vehicle on the ground.

Vehicle description: passenger vehicles. The clamp that secures the flexible fuel fill hose to the metal fill tube may be loose and could separate.

Vehicle description: electric pickup trucks. A condition in which the fuel-fired heater fill pipe ground strap contacts the rear passenger side brake pipe.

Vehicle description: school and transit buses equipped with bendix air brakes. Bendix changed the internal design of the qr1c relay valve by adding a hole in the internal diaphragm. When the hole in the diaphragm aligns with the hole in the valve body, the...

Vehicle description: passenger vehicles using aftermarket front passenger side seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no...

Vehicle description: passenger vehicles using aftermarket driver's seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "Seat...

Vehicle description: motorcycles. The bolts securing the alternator rotor to sprag clutch could become loose due to inappropriate assembly method.

Vehicle description: conversion vans. The rear axle can hit the fuel filler hose causing it to disconnect from the fuel tank, spilling fuel onto the ground.