Latest vehicle recalls

Vehicle description: passenger vehicles. The column switch levers can become loose or break over time.

Vehicle description: passenger vehicles. The column switch levers can become loose or break over time.

Vehicle description: motorcycles. Paint on the wheel and sprocket-mating surfaces could produce insufficient clamp load on the sprocket. Rear sprocket bolts could become loose causing excessive wear and fretting at the wheel and sprocket mating surfaces...

Vehicle description: heavy duty trucks. The installation of the aluminum steering driveline exceeds the u-joint angles specified by dana, the driveline manufacturer. By exceeding this specification, the u-joint could contact and cause a stress riser in the...

Certain passenger vehicles fail to comply with requirements of fmvss no. 301, "Fuel system integrity." The fuel fill fitting is not properly secured to the fuel tank. In that condition, fuel leakage would exceed the permissible amount in an fmvss test...

Vehicle description: passenger vehicles. The inner tie rod nuts are loose and can result in separation of a tie rod.

Vehicle description: motorcycles. The fuel hose disconnects between fuel pump regulator and fuel tank outlet nozzle. The fuel pump and hose are located inside the fuel tank assembly.

Vehicle description: motorcycles. The handle bars on these motorcycles can break.

Vehicle description: passenger vehicles equipped with a console armrest fail to comply with requirements of fmvss no. 201, "Occupant protection in interior impacts." The armrests were produced with a latch that will not withstand the vertical force...

Vehicle description: motor homes equipped with spicer 6,000 or 8,000 lb. Front steer axles. The tie rod end can pull outboard and separate from the tie rod tube due to improper thread engagement between the male tie rod end and the female tube.

Vehicle description: motor homes equipped with 16,000 lb., 18,000 Lb., Or 20,000 lb. Heavy duty steering axles. The inner wheel bearing cone for the steering axle wheel hub assembly does not properly fit onto the navistar steering axle spindle assembly...

Vehicle description: heavy duty trucks equipped with continental general s380a 295/75r22.5 Lr g tires, serial nos. A3371e5488 through a3371e5089. These tires have been overcured.

Vehicle description: heavy duty trucks. The outboard bearing on the steering axle hubs can fail due to water intrusion through a hubcap vent.

Vehicle description: fifth wheel travel trailers. These trailers can experience excessive flexing in the upper chassis which can lead to failure in the area of the pin box.

Vehicle description: school buses equipped with cummins isb engines. Electrical power cables may not have been routed properly from the alternator output to the starting motor.

Vehicle description: boat trailers equipped with aluminum wheels. These wheels have a chamfered central hole where the axle spindle passes through. On some, the chamfer is too shallow causing the wheel bearing dust cap to protrude behind the wheel. When...

Vehicle description: transit buses. Failure of a soft seat check valve in wheelchair lifts provided by lift-u, may allow the front and rear platform barriers to return to a horizontal position from the vertical position they are supposed to be locked in.

Vehicle description: motor homes equipped with slide galley option. The certification labels do not show the proper tire pressures. These pressures are below the required pressure for load carrying capacity.

Vehicle description: passenger vehicles. The passenger side air bag modules have an undersized inflator orifice.

Vehicle description: recreational vehicles using gas/electric absorption refrigerators supplied by norcold. The swivel nut which is an integral connection component of a pressure tap device has "stress corrosion cracking."