- The problem
- Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
- The risk
- A cable step that fails during use increases the risk of injury.
- The fix
- Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
Body, doors & structure
2018 Altec Aerial Device Body problems
No owner has filed a complaint about the 2018 Altec Aerial Device's body, doors & structure with NHTSA. Doors, hoods and latches, frame rust, sunroofs, leaks, trim and structural failures.
- Complaints
- 0
- Recalls
- 7
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Body recalls for the 2018 Altec Aerial Device
- The problem
- Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
- The risk
- A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
- The fix
- Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.
- The problem
- Altec Industries, Inc. (Altec) is recalling certain 2017-2018 AT37/41/48M, AT41P, AT48S, L37M, L42A, and TA40 aerial device vehicles. The rotation bearing fasteners may experience stress corrosion cracking.
- The risk
- Cracked rotation bearing fasteners may break, causing separation of the pedestal and turntable, increasing the risk of death and/or injury.
- The fix
- Altec will notify owners, and dealers will replace the rotation bearing fasteners, free of charge. The recall began on May 21, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 807.
- The problem
- Altec Industries, Inc. (Altec) is recalling certain 2018 Altec DM45, DM47B, DC45 and DC47 Digger Derricks and TA50 and TA60 Aerial Devices. The high strength fasteners used to secure the pedestal to the turn table may fail.
- The risk
- If the fasteners fail, the pedestal may separate from the turn table, increasing the risk of injury.
- The fix
- Altec has notified owners, and dealers will inspect the fasteners, replacing them as necessary, free of charge. The recall began October 26, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 701.
- The problem
- Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.
- The risk
- If the step separates from the platform, it can increase the risk of injury.
- The fix
- Altec will notify owners, and dealers will inspect the platform step and replace the platform if the step has separated from the platform and add a platform step reinforcing kit, free of charge. The recall began December 3, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 695.
- The problem
- Altec Industries Inc. (Altec) is recalling certain 2018 Altec AC18, AC23, AC30, AC40, AC45 Cranes, D2045, DT65 Digger Derricks, and AA55 Aerial Devices. The rotation platform fasteners may have been overtightened, possibly resulting in the fasteners breaking.
- The risk
- If the fasteners break, the pedestal or turntable may separate from the vehicle, increasing the risk of injury.
- The fix
- Altec has notified owners, and the rotation bearing fasteners will be replaced, free of charge. The recall began on September 21, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 692.
- The problem
- Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
- The risk
- If the platform moves unexpectedly, it can increase the risk of injury.
- The fix
- Altec will notify owners, and dealers will install a bracket reinforcing kit, free of charge. The recall is expected to begin October 17, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 689.
Body complaints
No complaints about this area yet.
Altec Aerial Device body complaints by year
Aerial Device body problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data