Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Body, doors & structure

2017 Altec Aerial Device Body problems

No owner has filed a complaint about the 2017 Altec Aerial Device's body, doors & structure with NHTSA. Doors, hoods and latches, frame rust, sunroofs, leaks, trim and structural failures.

Complaints
0
Recalls
6
Crashes
0
Fires
0
Injuries
0
Deaths
0

Body recalls for the 2017 Altec Aerial Device

Structure: frame and members

25V562000903 vehicles affected

The problem
Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
The risk
A cable step that fails during use increases the risk of injury.
The fix
Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.

Structure: body

23V2160001,967 vehicles affected

The problem
Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
The risk
A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
The fix
Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.

Structure: critical fasteners

21V239000120 vehicles affected

The problem
Altec Industries, Inc. (Altec) is recalling certain 2017-2018 AT37/41/48M, AT41P, AT48S, L37M, L42A, and TA40 aerial device vehicles. The rotation bearing fasteners may experience stress corrosion cracking.
The risk
Cracked rotation bearing fasteners may break, causing separation of the pedestal and turntable, increasing the risk of death and/or injury.
The fix
Altec will notify owners, and dealers will replace the rotation bearing fasteners, free of charge. The recall began on May 21, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 807.

Structure

18V84700049 vehicles affected

The problem
Altec Industries, Inc. (Altec) is recalling certain 2017 Altec AT37, AT41 and AT48 aerial devices. Some of the fasteners that secure the pedestal to the chassis may be missing or may be loose which can cause a loss of stability or separation of the pedestal.
The risk
A pedestal that is not secure can increase the risk of injury.
The fix
Altec will notify owners and will repair the vehicles, free of charge. The recall began January 31, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 706.

Structure

18V7060001,592 vehicles affected

The problem
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.
The risk
If the step separates from the platform, it can increase the risk of injury.
The fix
Altec will notify owners, and dealers will inspect the platform step and replace the platform if the step has separated from the platform and add a platform step reinforcing kit, free of charge. The recall began December 3, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 695.

Structure

18V552000530 vehicles affected

The problem
Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
The risk
If the platform moves unexpectedly, it can increase the risk of injury.
The fix
Altec will notify owners, and dealers will install a bracket reinforcing kit, free of charge. The recall is expected to begin October 17, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 689.

Body complaints

No complaints about this area yet.

Altec Aerial Device body complaints by year

Aerial Device body problems, every year

Had a body problem with your 2017 Aerial Device? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience