- The problem
- Federal-mogul is recalling certain replacement control arm assemblies, part numbers k7425, 10945, fa4510x, k7427, 10946, and fa4611x, sold for use on various passenger vehicles listed above. The ball joint on the control arm assembly can fail causing the ball stud to wear through the control arm housing resulting in noise and/or separation of the ball stud from the housing.
- The risk
- If there is a separation of the ball stud from the housing, the driver can loose steering control, possibly resulting in a vehicle crash.
- The fix
- Federal-mogul will notify owners of record and replace the affected control arms free of charge. The safety recall began on january 28, 2011. Owners may contact federal-mogul at 1-877-489-6659.
Vehicle safety record
1996 Chrysler Sebring Convertible Problems, complaints & recalls
No owner complaints about the 1996 Chrysler Sebring Convertible have been filed with NHTSA. It is covered by 3 recalls, the latest in December 2010 for the lower arm.
NHTSA data checked
CAbout as many problems as a typical Sebring Convertible year, for its age
- Complaints
- 0
- Recalls
- 3
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
1996 Chrysler Sebring Convertible recalls 3
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. The socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. The subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. The affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. The g10945 and g10946 are the same part as the d10945 and d10946 respectively. They are labeled differently depending on the aftermarket customer.
- The risk
- Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
- The fix
- Qualis automotive will replace the ball joints free of charge. The safety recall began on november 9, 2009. Owners may contact qualis automotive at 1-800-493-4128.
- The problem
- On certain passenger vehicles, the floor shifter ignition-park interlock may fail and allow the shifter to be moved out of the park position with the key removed. An inoperative interlock may also allow the key to be removed when the shifter has not been placed in the park position.
- The risk
- Either circumstance may result in the vehicle rolling away without warning.
- The fix
- Dealers will install a new load-limiting push rod into the floor shifter lever of the affected vehicles. Owner notification began on june 14, 2004. Owners should contact daimlerchrysler at 1-800-853-1403.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 1996 Chrysler Sebring Convertible yet
Chrysler Sebring Convertible: every year compared
All Sebring Convertible years1996 Chrysler Sebring Convertible vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 1996 Chrysler Sebring Convertible | 0 | 3 | C | |
| 1996 Chrysler Town & Country | 952 | 0 | F | Compare |
| 1996 Chrysler Sebring | 433 | 12 | F | Compare |
| 1996 Chrysler Concorde | 175 | 2 | C | Compare |
| 1996 Chrysler Cirrus | 174 | 11 | D | Compare |
| 1996 Chrysler LHS | 149 | 2 | F | Compare |
| 1996 Chrysler New Yorker | 26 | 1 | F | Compare |
| 1996 Chrysler Grand Voyager | 5 | 0 | C | Compare |
| 1996 Chrysler Eagle | 4 | 0 | D | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 1996 Chrysler Sebring Convertible
Does the 1996 Chrysler Sebring Convertible have any recalls?
Yes - NHTSA lists 3 recalls for the 1996 Chrysler Sebring Convertible: lower arm (December 2010); lower ball joint (October 2009); floor shift (January 2004). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 1996 Chrysler Sebring Convertible had?
None have been filed with NHTSA so far.
Is the 1996 Chrysler Sebring Convertible a reliable vehicle?
Its Safety Index is 50 out of 100 (grade C: about as many problems as a typical Chrysler Sebring Convertible year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Chrysler Sebring Convertible years have the most complaints?
1999 (91), 2000 (78), 1998 (52). See every Chrysler Sebring Convertible year compared.
What should I do if my 1996 Chrysler Sebring Convertible has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data