- The problem
- Vehicle description: light duty pickup trucks. The welds at the right side lower control arm bracket to axle tube attachment may have inadequate fatigue life due to poor weld quality. This can lead to separation of the control arm bracket from the axle tube.
- The risk
- If the bracket separates the vehicle could experience reduced directional stability, braking degradation and/or vehicle pull under braking.
- The fix
- Dealers will replace the front axle with a properly welded front axle.
Suspension
2000 Dodge Ram Suspension problems
Owners have filed 53 complaints about the 2000 Dodge Ram's suspension with NHTSA - 8% of all its complaints, most recently on September 29, 2020. They describe 4 crashes, 0 fires and 6 injuries. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
- Complaints
- 53
- Recalls
- 1
- Crashes
- 4
- Fires
- 0
- Injuries
- 6
- Deaths
- 0
Suspension recalls for the 2000 Dodge Ram
Suspension complaints
I purchased a used 2000 dodge ram 1500 and noticed that my suspension on my truck is not right. I experience jerking upon braking. It sounds like metal upon metal while I am driving. It is extremely loud also. Under my foot while I am driving I can feel the grinding noise and often it feels very hot.
The dodge ram 1500 4x4 try k needs to be recalled due to bade fram rust and bad body rust and for the bad dash that dodge put in them but let's first. Talk about a safety recall for the bad farms that was used I want my truck fixed and dodge should be made to do so
Uncontrollable wheel shake (death wobble), until you come to complete stop which the violent shaking in turn affects how I brake. Chrysler revised the steering set up and kept it a secret until you made a complaint even then they just say you need to replace all steering components mean while what they install is nothing like what was there. Chrysler should be responsible for poor engineering- this can hurt someone one day and would rather see it not. Violent wheel shake I mean violent. If a product is designed...
Read the full complaint
wrong and manufacture creates a fix for so called design flaw then there should be a recall. Http://blog.Dieselpowerproducts.Com/dodge-front-end-issues-and-the-dreaded-death-wobble this link contains chryslers revised parts. *Tr
Violent convulsive bouncing shaking wobbling movement in the front suspension and steering at moderate to high speeds. *Tr
Tl*the contact owns a 2000 dodge ram 1500. While performing maintenance on his vehicle, the contact noticed that the left control arm bracket was partially torn and exhibited a stress fracture. He referenced recall nhtsa campaign number 00v007000, suspension, front, control arm lower arm. The contact called the manufacturer and was advised that his vehicle was not part of the recall. The contact does not feel safe driving the vehicle. The failure and current mileages were 98,000.
Purchased a 2000 1500 quadcab dodge ram for 15,000. Three weeks later had to repair front brakes front rotors and front ball joints. Cost $700. Dealer refused to do anything about it. *Nm
Noticed reduced directional stability, braking degradation and vehicle pulled under braking conditions. This lead me to take vehicle in for service. While on the vehicle rack it was discovered that both lower control arms had cracked in the exact same location on both sides. Additionally, cracks were discovered due to what appeared to be poor welds on the front axle. On 01-16-2006, I authorized the following work to be done at my own expense: 1) replacement of cracked lower control arms and welding of the...
Read the full complaint
cracked front axle recall 00v007000). Replacement control arms were reinforced in the area that failed on both stock oem control arms. The replacement arms where almost twice as heavy as the originals. With this information, I contacted dodge daimler/chrysler to explain the situation and requested a reimbursement for the parts replaced. Chrysler denied the request and said that there were no recalls on the vehicle for the above listed issues. All repair work has been completed and I have the original lower control arms available upon request. Pictures of the both parts are also available upon request.*Ak
My wife was driving our 2000 dodge dakota quad cab in a parking lot when the lower driver side ball joint failed causing a crash into a concrete pole at the driver side door. There were no unusual noises before the failure and the upper ball joints had been replaced this year as part of the recall on all dakotas. This caused my wife to hit her head on the driver side window on impact. *Nm
Dt: the contact states there is a nhtsa recall campaign 00v007000 concerning front suspension control arm: lower arm. This vehicle is experiencing the same problems as indicated in the recall, but is not included in the recall due to vin. No recall repairs have been done at this time. *Ak
The "check gauges" indicator alerted and the oil pressure went to zero. The vehcile sputtered and the engine stopped. I found out from my mechanic that the engine had siezed and would cost $5000.00 To repair.I have already had two transmissions replaced at a cost of 3,300.00 And cannot put anymore into this defective vehicle. 2000 Dodge1500 ram 4x4.
Nhtsa recall campaign 04v596000; daimler chrysler issued a front upper ball joint recall. This vehicle was not included in the recall, but had the upper ball joints making a clicking noise, which sounded like they were going to fall off.*Ak
The wheels on the consumer's vehicle fell off at 20,000 miles. The consumer wants to know why the manufacturer excluded the 2000 dodge ram when it has the dodge recall problems. *Bf *nm *sc *tc *jb
I own the 2000 dodge 1500 quad cab pickup. The front ball joints had to be replaced. The consumer wants to know why his dodge truck was not included in the recall. *Bf *nm *sc the consumers vehicle had 43000 on it at the time of the failure. *Tc *jb
While having the front passenger side tire check by the dealership because it was balled. The dealership noticed that the wheel bearing lubrication had depleted. This resulted in the hub developing rust and the axle seizing. *Mr
2000 Dodge 2500 has loose steering,wanders,darts left or right and constantly correcting the steering wheel and shimmy. Truck darted to the edge of the road and went thru the ditch while towing a trailer and I have back and neck injurys and unable to work at my old profession. And dodge is trying to settle with now and stop the website. Please look at www.Dodgetrucksteeringproblems.Com and get back with your opinion and please look at the problems other people are having and the denying by dodge.
1.Body jumps at different speeds unable to steere.2.Odometer reading didn't move for approx- 1st 200 miles.3.Engine knocks. 4. Shifting linkage and gears grind. 5. Transmission slips and front axle grinds. 6.Salesman said I was approved and did qualify for any vehicle in the lot with $10,000.00 Down.Called finance company after purchase and was approved for the vehicle I originally wanted.7.Brakes need to be replaced all the way around. Thank you, [[redacted]] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
There were front suspension/ ball joints problem. The vehicle was diagnosed by independent mechanic. *Ak
Vibration & noise in right front when turning, dealer checked found noise coming from r/s lower ball joint & drag link broken - delaer replaced drag link and ball joint kit.*Ak
Problems with vehicle's upper ball joints.*Mr a technician told the consumer that the upper ball joints were worn. *Ph *nm
I have two issues to relay. I have a 2000 dodge ram 1500 quad cab truck. I currently have approximately 54,000 miles on it. I just recently had to have the driver side front wheel bearing assembly replaced. This wa sa known defect was told, and was specifically excluded from my extended warranty (go figure). This cost me almost $ 500.00. Per the mechanic, there was a plastic retainer device that broke and allowed the nut to back off, and this destroyed the wheel bearing assembly. I was told that my wheel was in...
Read the full complaint
danger of falling off. Second, my truck started making clunking noises when I turned or went over bumps. A local mechanic inspected my truck and told be my ball joints were defective. They have seen this a lot. I have done some research and believe the suspension on my truck was the same as the durango. Now they were subject to a recall.*Ak sincerely, norman l'heureux. *Ak
I own a 2000 dodge ram 1500, 2 wheel drive. As I looked through your site I found a recall on the suspension of the right control arm. About 1 year ago the truck the truck needed tie rod ends according to the dealership. A loud squeaking was to be fixed by the tie rod ends. Once in the shop I received a call saying that the right control arm had a bad bushing and to replace the rubber bushing I needed to replace the whole control arm. No one person could tell me why. According to your recall, my bad tie rod ends,...
Read the full complaint
shocks, and control arm are a result of a bad axle. The dealership claims this all happened from the control going bad. The truck had only 100,000 miles at the time,this cost me 1,500.00. The truck is now starting to have the same noises as a year ago. Could this be the recurring problem,should I just keep replacing the right side control arm. My truck is all road miles,no four wheeling, no towing, no accidents. What you have pointed out I feel is more prevalent than 76 vehicles. I contacted the dealership, they stated there is no recall of this kind for my truck, then why is it with you people and why is it exactly as you have stated. I feel you are right,i feel there is a problem, I also feel putting on new control arms does not fix the problem which I feel is returning and I fear another 1,500.00 Bill is on it's way. Please help! *La
Front lower control arms are rubbing against both drivers and passenger side tires causing premature wear and damage to the tires. This is evident during regular vehicle maintenance inspections. Both tires have visible wear and control arms have visible tire contact points. This problem was initially noticed during vehicles first tire rotation. *Nlm
Hard left hand u-turn causes tire to rub on lower a frame, shredding tire. Dt
The suspension is cutting the tire causing the tire to lose air. Dealer notified. *Mr
While traveling on highway vehicle will wander from side to side. Dealer is aware of problem.*Ak
Dodge Ram suspension complaints by year
Ram suspension problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data