- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
- The risk
- Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
- The fix
- Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Transmission & drivetrain
2017 Ram 5500 Transmission problems
Owners have filed 8 complaints about the 2017 Ram 5500's transmission & drivetrain with NHTSA - 38% of all its complaints, most recently on September 20, 2022. They describe 0 crashes, 1 fire and 0 injuries. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.
- Complaints
- 8
- Recalls
- 2
- Crashes
- 0
- Fires
- 1
- Injuries
- 0
- Deaths
- 0
Transmission recalls for the 2017 Ram 5500
- The problem
- Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
- The risk
- Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
- The fix
- Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Transmission complaints
The contact owns a 2017 Ram 5500. The contact stated that while driving approximately 70-75 MPH, there was an abnormally loud banging sound coming from the vehicle. The driver pulled to the side of the roadway and became aware that the transfer case had fractured into several pieces, and the front driveshaft had also fractured in several pieces. The contact stated that the fuel lines and the exhaust pipe were severely damaged. The vehicle was towed to the dealer where the fuel lines, brake line, electrical wiring, transfer case, front driveshaft and the entire exhaust system were replaced. The manufacturer was not made aware of the failure. The approximate failure mileage 310,000.
The contact owns a 2017 Ram 5500. The contact stated while driving approximately 70-75 MPH, there was a loud banging sound coming from the vehicle. The contact stated that the transfer case had fractured and the front driveshaft had failed. The vehicle was towed and remained at the towing lot. The dealer was contacted and informed of the failure however, the vehicle was not towed to the dealer. The dealer stated that the failure was a known failure however, the vehicle was not under recall for the failure. The vehicle was not yet repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 292,000.
The contact owns a 2017 Ram 5500. The contact stated that after shifting into park(P), the vehicle rolled away and the parking brake failed to stop the vehicle. The contact used rocks to chock the front tires to stop the vehicle from rolling. The vehicle was not diagnosed nor repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 193,000.
Vehicle was driving on interstate at 70mph and started vibrating violently, a few seconds later there was a loud bang that turned into multiple bangs that could be felt at the drivers feet and the truck stalled. We had it towed back to our shop and found that the transfer case had exploded causing the front driveshaft to come apart which ended up tearing through the drivers floorboard, destroyed the engine and transmission wiring harnesses, cracked the transmission casing, and severed the brake and fuel lines. Luckily there were no injuries. The truck has 103,180 miles and is regularly maintained per chrysler specifications.
On i-40 eastbound mile marker 121 vehicle starts to shake and vibrate violently. I hear an explosion under the truck which cause a loss of power and had to fight with truck to get it off the road all why at a speed of 65 mph. Transfer case exploded cutting wire harness in half and rupturing the fuel line. Truck was smoking bad as oil and fuel was leaking everywhere. Truck is inop at this point. Please help with this matter in an effort to help others from this experience. I almost wrecked trying to get the vehicle off the road after the transfer case exploded
While driving a vibration was noticed at speeds above 45 mph. During transit the transfer case exploded causing a major failure of multiple systems. This failure occurred on a state highway leaving waco tx at 445 a.M. Police were dispatched to block traffic from further accidents until a tow vehicle was dispatched to the scene. Upon further investigation it was very noticeable that the transfer system in the powertrain system had exploded. This failure has caused multiple collateral damages to systems in the vicinity of the failure.
Tl* the contact owns a 2017 ram 5500. While driving approximately 50 mph, the vehicle shifted out of gear and went into neutral. Without warning. The failure recurred several times. The vehicle was taken to southfork chrysler dodge jeep ram (844-350-9615, located at 17725 s freeway, manvel, tx 77578) where it was diagnosed that the shifter cable needed to be replaced. The contact also stated that the fuse in the fuel pump overheated without warning. The failure caused the fuel pump to seize and the vehicle to shut...
Read the full complaint
off. The vehicle was taken to the same dealer and the contact was informed that the failure was not covered by the warranty. The contact also stated that the idler pulley belt fractured, which caused the steering to lose power and the air conditioning to lose its cooling capability. The manufacturer was made aware of the failure and referred the contact to nhtsa. The failures were not repaired. The failure mileage was approximately 37,000.
While driving the vehicle on the highway the transfer case exploded, chrysler determined that the repairs would not be covered under warranty. However, we provided proof of service over the time period that the vehicle was in service which was only 6 months. They explained our parts were not properly greased and maintained. We do know a business associate that had the exact same thing happen to his vehicle. I did research and in the past this has been a similar problem and recalls for the same exact issue...Please help!!
Ram 5500 transmission complaints by year
5500 transmission problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data