Latest vehicle recalls

Vehicle description: s -trucks equipped with 2 wheel drive. These vehicles may have had the right-hand antilock brake system (abs) module feed pipe and/or brake crossover pipe tube nuts tightened without seating the pipe-flared-ends enough to withstand...

Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 101, "Control location, identification, and illumination." The instrument panel backlighting may not function after adjusting the interior light...

Vehicle description: van trailers with slide suspensions. Improperly applied weld attachment of the upper bogie rails to trailer crossmembers.

Vehicle description: minivans. Fuel can leak from the fuel tank at the interface of the fuel pump module attachment.

Vehicle description: passenger vehicles. The lower control arm attaching brackets can crack due to fatigue and separate from the engine cradle.

Vehicle description: light duty pickup trucks. (2500 And 3500 series 4x4 regular cab pickup produced before march 21, 1995; 2500 and 3500 series 4x4 club cab pickup produced before june 8, 1995; and 3500 series 4x2/4x4 chassis cab trucks produced before...

Vehicle description: passenger vehicles. The lower seat back attaching bolt on the driver seat can fail and separate.

Vehicle description: mini vans. The fuel tank retention strap (two straps per vehicle) can break at the spot welds causing an underbody rattle.

Vehicle description: light duty pickup trucks equipped with dunlop tires, size lt215/85r16. These tires are experiencing deflation as a result of stress splits or cracks occurring from the point of attachment of the sidewall to the square bead wire bundle...

Vehicle description: heavy duty trucks equipped with steering columns supplied by douglas autotec. The steering columns on these vehicles may have a defective or dislocated weld.

Vehicle description: mini vans. The fuel tank retention strap (two straps per vehicle) can break at the spot welds causing an underbody rattle.

Vehicle description: motorcycles. Threaded fasteners that hold the throttle body valve in assembly can become loose, allowing the valve disc to shift out of position and affect the engine rpm level.

Vehicle description: electric vehicles. The transaxle may have been manufactured with the park detent spring misaligned. If the spring is misaligned, the park mechanism may not engage when the shift lever is placed in the park position.

Vehicle description: heavy duty trucks equipped with caterpillar engines and eaton autoshift transmissions. The engines can stall because of software problems.

Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 108, "Lamps, reflective devices, and associated equipment." Because of a problem in the hazard warning switch assembly, the turn signal lamps may not work...

Vehicle description: passenger vehicles. The tire pressure placard required by fmvss no. 110, "Tire selection and rims," was misprinted. It incorrectly contains the tire sizes, seating capacity, and luggage capacity.

Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 301, "Fuel system integrity." These vehicles may have been produced with an inoperative valve within the fuel tank assembly.

Vehicle description: motor homes. A generator muffler strap was omitted during the installation process.

Vehicle description: motorcycles. These motorcycles were built with a fuel tank vent fitting that could be plugged allowing the carburetor to overflow fuel.

Vehicle description: streetcars and transit coaches . The transmission control cable can rub against the electrical junction box power stud allowing battery current to flow directly to ground.