Latest vehicle recalls

Line pressure surges occur when the transmission is in high gear lockup due to a plumbing error. Consequence of defect: line pressure...

Only two emergency window exists were identified on the left side of the bus, instead of three required by fmvss 217. Consequence of defect: buses do not...

Under certain electric load conditions, the headlight switch may have some internal plastic deformation. Consequence of defect: headlight...

Dual rear wheels may have pin hole leaks and cracks around the old valve stem hole that had been welded. Consequence of defect: driving with the...

Park brake assembly pawl may be improperly hardened. Consequence of defect: pawl could yield under load resulting in loss of parking brakes.

A piece of gear could break at the mainshaft first gear in the transmission case. Consequence of defect: if gear tooth...

Brake light switch could overheat, eventually leading to melting of plastic internal parts in area of electrical contacts.

More fuel than permitted by fmvss 301 may escape from the fuel tank assembly. Consequence of defect: cars are not in...

Left and/or right rear spindle assemblies may have been improperly heat treated. Consequence of defect: if spindle stem...

Accelerator cable bushing could disconnect from the accelerator lever assembly. Consequence of defect: this could...

There may not be enough clearance between the power steering pump return hose and the engine exhaust manifold. Consequence of defect: hose could...

Steering shaft assemblies contain lower shafts of insufficient length for proper attachment to the shaft insulator flange. Consequence of defect: shaft could...

The wiring harness may chafe against the windshield wiper motor bracket. Consequence of defect: if a short...

Wiring harness in the engine compartment may be misrouted and subject to damage. Consequence of defect: a short circuit...

Tire and wheel information on certification label may be incorrect. Consequence of defect: trucks fail to...

Tire label contains incorrect tire size information. Consequence of defect: vehicles fail to comply with fmvss 110.

The two parts of the steering column disengagement element could completely disconnect if the car contacts an object in the roadway or elsewhere of sufficient mass to apply a significant force directly to the steering gearbox...

Seat belts can loosen as the truck is driven. Consequence of defect: driver and passenger would not be properly restrained in event of a sudden stop or crash.

Air volume calculations are incorrect. Consequence of defect: trucks do not comply with fmvss 121, air brake systems.

Soldered terminals of the cruise control computer may develop cracks due to improper application of the coating to the printed circuit board...