- The problem
- Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.
- The risk
- Decreased lighting visibility may result in a vehicle crash.
- The fix
- Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
Vehicle safety record
2000 Dodge Ram Problems, complaints & recalls
Owners have filed 659 complaints about the 2000 Dodge Ram with NHTSA, most often about the body, doors & structure (266) and the transmission & drivetrain (65). Those complaints describe 68 crashes, 14 fires and 84 injuries. It is covered by 11 recalls, the latest in May 2009 for the headlights. For comparison, the 1999 has 0 and the 2001 has 1,430.
NHTSA data checked
FFar more problems than a typical Ram year, for its age
#9 most complained-about 2000 vehicle
- Complaints
- 659
- Recalls
- 11
- Crashes
- 68
- Fires
- 14
- Injuries
- 84
- Deaths
- 0
Most common 2000 Dodge Ram problems
Share of all 659 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2000 Dodge Ram recalls 11
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.
- The risk
- Decreased lighting visibility may result in a vehicle crash.
- The fix
- Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.
- The problem
- K2 motor is recalling 1,921 aftermarket headlamps of various models sold for use on the above listed vehicles. These headlamps are missing the amber side reflex reflector which fails to conform with the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment."
- The risk
- Without the amber side reflex reflectors, the lighting visibility may be affected, possibly resulting in a vehicle crash.
- The fix
- K2 motor will notify owners and offer a full refund. The recall began on decemeber 17, 2008. Owners may contact k2 motor at 1-909-839-2992.
- The problem
- Certain cequent 90 degree 7-way right angle adaptors sold by distributors in tow packages for aftermarket sales to tow 5th wheel rv travel trailers. Due to incorrect wiring of the harness, the trailer lights may not operate properly.
- The risk
- If the trailer lights are not working properly, a vehicle crash can occur.
- The fix
- All of the defective tow packages are still at the distributor level and have not been sold to any consumers.
- The problem
- Certain aai motorsports combination lamps sold as replacement lamps for use on the above list passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment."
- The risk
- Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash
- The fix
- Aai motorsports will notify owners and replace the lamps free of charge. The recall began on august 1, 2006. Owners may contact aai motorsports at 909-923-9188.
- The problem
- On certain van and wagon vehicles equipped with 4-wheel antilock brake systems (abs), aftermarket batteries may leak electrolyte onto the abs control module connector, which can compromise sealing integrity of the connector.
- The risk
- This may allow development of a short circuit in the connector, which could eventually lead to a fire.
- The fix
- Dealers will inspect the abs control module connector for electrolyte damage and replace the connector as necessary. The recall will begin on september 27, 2004. Owners should contact daimlerchrysler at 1-800-853-1403.
- The problem
- Vehicle description: vans and wagons not equipped with power front seats. In the presence of road salt, water, and possibly other debris, the power seat connector located beneath the driver's seat could develop a high resistive short circuit that cycles the circuit breaker.
- The risk
- If the circuit breaker cycles for an extended period of time, heat could build up in the connector, possibly resulting in a fire.
- The fix
- Owners will receive instructions for removing the circuit breaker from the fuse panel. If an owner desires, their dealer can perform the repair. Owner notification began august 27, 2001. Owners who do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.
- The problem
- Vehicle description: pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: the ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th vin position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th vin position) from may 23, 2000 through october 23, 2000. Important: vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.
- The risk
- When this occurs, the material could interfere with the clockspring ribbon and cause an open circuit. The driver air bag system will become disabled, and the air bag warning lamp will illuminate on the instrument panel.
- The fix
- Dealers will replace the clockspring assembly. Owner notification began june 18, 2001. Also some 1997-200 model year vehicles that, according to warranty records, have had a suspect replacement clockspring installed, will also be included in this campaign. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.
- The problem
- Vehicle description: pickup trucks equipped with an anti-lock braking system (abs). Some vehicles may have inadequate clearance between the front tire/wheel and the brake hose/abs sensor wire assembly. During full lock turns, it is possible for the tire or wheel to contact the brake hose/abs sensor wire assembly.
- The risk
- This could ultimately result in wire damage and/or a hole in the brake line, affecting brake effectiveness, increasing the risk of a crash.
- The fix
- Dealers will replace the front brake hose assemblies, and the abs sensor wire will be inspected and replaced if necessary. Owner notification began march 8, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.
- The problem
- Vehicle description: pickup trucks equipped with optional trailer hitch. The trailer hitch side brackets were manufactured using material with insufficient strength.
- The risk
- Brackets built without proper material could fatigue and fracture in the area where the trailer hitch mounts to the frame.
- The fix
- Dealers will inspect the trailer hitches and replace any trailer hitch showing signs of fatigue cracking. If no evidence of cracking exists, the dealer will install two reinforcement brackets.
- The problem
- Vehicle description: light duty pickup trucks. The welds at the right side lower control arm bracket to axle tube attachment may have inadequate fatigue life due to poor weld quality. This can lead to separation of the control arm bracket from the axle tube.
- The risk
- If the bracket separates the vehicle could experience reduced directional stability, braking degradation and/or vehicle pull under braking.
- The fix
- Dealers will replace the front axle with a properly welded front axle.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
659 complaints about the 2000 Dodge Ram
Newest first, as filed with NHTSA by owners. Page 5 of 27.
Dash in my 2000 dodge ram 1500 is falling apart, and where it's cracked edges are like razor blades. *Tr
Dash cover has self destructed into many jagged and broken pieces. I have had pieces drop into the dash and my biggest concern is that in event of an accident this will come loose with impact or be propelled by the deployment of the airbags and become missiles inside of the vehicle. *Tr
2000 Dodge ram 1500 truck. Consumer writes regarding cracks in the vehicle dashboard *tgw
The dash on my 2000 dodge ram 1500 pickup started cracking a few years ago. The cracks have managed to meet and now entire shards of sharp hard plastic are falling into my dash and also protruding from my dash. They could easily injure someone. I have read in many forums that this appears to be a very common issue for this model truck. I have not replaced the dash yet because I do not know if the replacement dash would have the same problem since this issue has not been addressed by the manufacture. This is a very dangerous problem. *Tr
The dashboard in my 2000 dodge ram 1500 slt has been slowly cracking for the past 6 years or so and has now a sizeable hole from a piece breaking off. My concern is the "dry insulation" that causes dust to filter into my ventilation system and blows into the cab for me and my passengers to breath. Not healthy at all. This product should be recalled or paid for a replacement. There is no solution other than to replace. *Tr
I bought my 2000 dodge ram brand new. About 3 years ago I noticed some small cracks in the dash, then some time last year, the dash started collapsing in huge sections. I then started having electrical problems. I checked with my mechanic and he said it is a result of the sun hitting the wires through the holes in the dash. I then bought a dash cover to stop any further sun damage but continue to have intermittent electrical problems. It has gotten to where it is unsafe to drive. *Tr
Dashboard failure on 2000 dodge ram 1500 truck. The dashboard has fractures / cracks that propagate to airbag area passenger side. I have shut airbag off on the passenger side in fear of airbag ignition and flying shards of hard plastic coming from decomposing dash. It is apparent that this plastic material is defective considering the vehicle is garaged and has only 46,000 miles on it's od. Dash area on drivers side has completely fractured with pieces beginning to dislodge and fall into wiring harness above steering area. Fear is chaffing occurring at wire harness locations from dislodged plastic shards and creating the potential for electrical interior fire. *Tr
Dash of 2000 dodge ram 1500 cracking in several areas and is now falling apart causing loose pieces to become lodged below the dash area that could interfere with the deployment of the airbag or become flying pieces in an accident. *Tr
`Like thousands of other dodge ram owners, I have a severely cracking and collapsed dashboard in my 2000 ram 1500. The cracking started around 60kmi and had started on the passenger side originating from the bolts securing the upper dash to the inside firewall. Eventually a crack will form from all of the bolts, with some crack connecting with others causing pieces of the dash to collapse. Once this happens, the upper (5) bolts will be providing no support to any part of the dash, except for those pieces directly...
Read the full complaint
connected to the bolts. This vehicle was assembled in the mexico plant. I believe that the problem is with the installation. My theory is that when the dash is originally installed, the dash is rested upon (2) bolts at the bottom under the side kickplates and then the top (5) are used to bring the dash into its final resting position. While doing this, there may still be residual forces on those top bolts pulling the dash down even after the (2) lower bolts are tightened. The procedure should be to push or hold the dash in place until the lower (2) bolts are tightened and then the top (5) bolts are there only to secure the upper dash only. I would like to recommend installing a center shimmy brace that would be used to position the assembly in the final resting position that would connect between the dash subframe and the inside firewall. Once in position the dash the lower (2) bolts can be torqued. Then the (5) top bolts would not be attempting to hold the dash in place. I consider this a safety hazard during an event where the passenger side airbag is deployed and potential sharp pieces of the cracked dashboard are thrown about the cab area. *Tr
The front cover and top of the dashboard on my 2000 dodge ram 1500 has been slowly falling apart over the last two years. I have removed the front instrument cover due to dangerous sharp edges. The top of the dash has split into four sections with numerous cracks radiating from the bolts near the windshield. Had a 6"x10" section of the top dash pop out and land in my lap when I hit a pothole. *Tr
The dash on my dodge ram 1500 is completly falling apart. This started when this truck had 30,000 miles but now the wiring ,controling radio,speakers lights, etc is being affected - this has now became a safety hazard. *Tr
I was driving my 2000 dodge ram 1500 4x4 truck on interstate going 70 mph and started to slow down due to exit traffic. When I applied my brakes my truck went into acceleration. No cruise was on. Kept applying brakes and truck kept acceleration. Kept applying brakes and finally got speed down to 20 mph. I'm in panic mode and not knowing what to do I put the truck in park and then turned the key off. Brakes smoked badly. Got out of truck to see problem and the throttle was stuck. Started truck up again and it...
Read the full complaint
did the same thing but this time put gear in neutral and turned key off. Unstuck throttle again. I was able to get truck to a mechanic. They checked the throttle kit and it seemed ok (it was not one that was on a recall list). The mechanic didn't really know what caused problem. They put a new kit in and cleaned fuel injectors and it has been running ok. Fortunately I was on interstate hwy. If I had been anywhere else I feel certain I would have caused an accident. This caught me by total surprise and not knowing how to handle a vehicle in this situation I feel I was pretty lucky that I didn't burn my brakes up, blow my transmission or get killed. I wish I knew what really caused this problem. *Tr
Tl*the contact owns a 2000 dodge ram 1500. The contact stated that he was involved in a minor crash while driving up a hill. The bottom of the front bumper fell on the road and caused the vehicle to stop. The contact stated that the passenger was injured. She suffered a dislocated broken sternum. The police responded but did not file a report. The owner discovered that the passenger and the driver side front seat belts had also failed during the crash. The belts did not lock in place. The owner believed that...
Read the full complaint
the reason for the passenger was injured was because the seat belts failed to function properly. The vehicle was taken to the dealer who replaced both seat belts at chryslers expense. The mechanic tested the new belts and the new drivers side belt was also defective and would not lock. The dealer ordered another seat belt and it appeared to function normally. The failure mileage was approximately 109,795. The current mileage is 120,000. The consumer stated while driving, he struck a sand hill. The vehicle received minimal damage and did not hinder drivability. Updated 11/17/10
Tl*the contact owns a 2000 dodge ram 1500. While performing maintenance on his vehicle, the contact noticed that the left control arm bracket was partially torn and exhibited a stress fracture. He referenced recall nhtsa campaign number 00v007000, suspension, front, control arm lower arm. The contact called the manufacturer and was advised that his vehicle was not part of the recall. The contact does not feel safe driving the vehicle. The failure and current mileages were 98,000.
The dashboard of my 2000 dodge ram 1500 has been slowly cracking and caving in over the past 4 years. I fear this is a safety hazard as it will affect the deployment of the air bags and electrical components exposed are also a hazard. Dodge chrysler is well aware of this defect and needs to fix these pickups. We paid fair market for them and now we can't even sell an otherwise beautiful truck. *Tr
My dodge truck driving on the freeway at 65 all gauges zero out and the no bus reading is displayed on the odometer readout the truck is unresponsive losing power all warning lights are displayed on instrument panel. The truck now stalls at stop lights and runs rough. It has been at two shops the shops have replaced the computer the instrument cluster the body control module and has checked every wire and has not found any solutions. *Tr
2000 Dodge ram 1500 -dec 2009 - 47000 mile. No indication of brake issues until hitting them hard to avoid car that ran a red light. Brake line from master cylinder to rwal unit failed (pinhole leak), but managed to avoid collision. Drove home (slowly) and fabricated/installed replacement section (about 16" long). After bleeding brakes - drove truck normally until june 2010. Then, with no warning, the brakes again failed in a parking lot stop. Found the leak in the rear section of the line running from front to...
Read the full complaint
rear.Dealer estimate to replace all hard lines is $1000. Who can afford that ?? So, I will be spending many hours of my own time to fix the problem caused by cheap imported chinese steel. Thanks bill clinton !! I have other "good american cars" that are 40+ years old and 100k+ miles with the oem lines still good. These new vehicles suck !!! *Tr
SEVERELY CRACKED DASHBOARD...CUT THUMB / HAND. *TR
Had vehicle inspected prior to getting front end alignment at tire discounters. They noticed a bulge on the inside sidewall. Kelly tire less than 30 days old. They tried to tell me that the bulge was from someone hitting a pot hole to hard. I think that it is a defective tire and they just did not want to take care of it. I was told that all the tire that were purchased at a goodyear retailer were 2nds with known defects. I contacted a goodyear retailer where I live and they refuse to replace them unless I was the original purchaser with the receipt. *Tr
2000 Dodge ram 1500 dash cracking all over and has large pieces missing and just keeps cracking before to much longer won't be any dash left to worry about . You all should make the chrysler or dodge corp. Fix this problem I know I'm not the only dodge truck owner with this problem. *Tr
I have a 2000 dodge ram 1500 extended cab and the hood unexpectedly flew up going down the highway and smashed my window and the hood is destroyed. This is the second time, very very dangerous, for me and the drivers behind me. The grill flew off and possibly damaged the cars behind and next to me. The first time it happened was a couple years ago and I was very lucky it was not a busy road and I was only going abut 35-45 mph. To correct it I had to buy a new hood,grill and all parts pertaining to the hood replacement....Oh also a new windshield. Thanks dodge! *Tr
My dash board started cracking and then just collapsed the pieces are very sharp and continue to fall off
Tl* the contact owns a 2000 dodge ram 1500. While driving at speeds of 50 mph, the vehicle crashed into the rear of another vehicle. The contact could not recall the details of the crash since he was unconscious. He was taken to a hospital where he later became conscious and was advised by a state trooper that the air bags did not deploy upon impact. The vehicle was destroyed. A police report was filed. The contact was injured during the crash. Neither the dealer nor manufacturer had been contacted when the complaint was filed. The failure and current mileages were 135,000.
My dash is all broken up also. I also had it replaced once while it was still under warranty very very poor design. My first new vehicle. How disappointing. *Dt
The whole dash on my 2000 dodge ram 1500 has caved in leaving jagged edges everywhere and my electrical wires exposed. Smaller pieces sometimes fall into the air vents and blow out into my face. The problem started with cracks and by november 2008, the dash was almost completely gone. *Tr
Dodge Ram: every year compared
| Year | Complaints | Recalls | Grade |
|---|---|---|---|
| 2004 | 1,157 | 7 | F |
| 2003 | 1,359 | 7 | F |
| 2002 | 942 | 6 | F |
| 2001 | 1,430 | 14 | F |
| 2000 | 659 | 11 | F |
| 1999 | 0 | 13 | F |
| 1998 | 0 | 17 | F |
| 1997 | 0 | 11 | D |
| 1996 | 0 | 14 | F |
2000 Dodge Ram vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2000 Dodge Ram | 659 | 11 | F | |
| 2000 Ford F-150 | 0 | 17 | C | Compare |
| 2000 Chevrolet Silverado | 0 | 20 | D | Compare |
| 2000 GMC Sierra | 0 | 12 | F | Compare |
| 2000 GMC Sierra 1500 | 0 | 3 | B | Compare |
| 2000 Dodge Ram 1500 | 0 | 3 | B | Compare |
| 2000 Toyota Tundra | 0 | 7 | B | Compare |
| 2000 Dodge Durango | 1,097 | 4 | F | Compare |
| 2000 Dodge Intrepid | 1,089 | 9 | F | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2000 Dodge Ram
Does the 2000 Dodge Ram have any recalls?
Yes - NHTSA lists 11 recalls for the 2000 Dodge Ram: headlights (May 2009); exterior lighting (April 2009); headlights (August 2008); electrical (August 2007) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2000 Dodge Ram?
By the complaints owners filed with NHTSA, the most common problem areas are the body, doors & structure (266), transmission & drivetrain (65), airbags (64).
How many complaints has the 2000 Dodge Ram had?
659 complaints have been filed with NHTSA, the first on January 20, 2000 and the latest on June 17, 2022. Of these, 68 describe a crash and 14 a fire, and together they report 84 injuries and 0 deaths.
Is the 2000 Dodge Ram a reliable vehicle?
Its Safety Index is 0 out of 100 (grade F: far more problems than a typical Dodge Ram year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Dodge Ram years have the most complaints?
2001 (1,430), 2003 (1,359), 2004 (1,157). See every Dodge Ram year compared.
What should I do if my 2000 Dodge Ram has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data