Latest vehicle recalls

Vehicle description: passenger vehicles. If the driver or front passenger safety belt is pulled out much faster than normal, a number of time, the lock-up feature of the retractor will not work properly.

Vehicle description: passenger vehicles originally sold or currently registered in the states of connecticut, district of columbia, delaware, iowa, illinois, indiana, kentucky, massachusetts, maryland, maine, michigan, minnesota, missouri, new hampshire, new...

Vehicle description: passenger vehicles. During pre-assembly of the fuel tanks, an incorrect filler neck was installed causing the filler neck to not "match" the fuel cap.

Vehicle description: heavy duty trucks. The steel braided tether of the safety belt buckle is deformed and can possibly be cracked. This happens as the seats are being moved on the sliding rail, at the same time they are often caught and pinched under the...

Vehicle description: passenger vehicles originally sold or currently registered in the states of alaska, colorado, idaho, illinois, iowa, kansas, maine, michigan,minnesota, montana, nebraska, nevada, new hampshire, new york, noth dakota, south dakota...

Vehicle description: passsenger vehicles. These vehicles were built with suspect cold welds on the right side in the tunnel area of the floor pan. This does not comply with the requirements of fmvss no. 210, "Seat belt anchorage."

Vehicle description: transit buses. A burr on the spool bore of the steering gear pumps can result in the loss of oil flow.

Vehicle description: motorcycles. The e-clip which retains the drive pin on the front brake rotor and carrier can separate from the drive pin allowing the pin to move out of position and come in contact with the front brake caliper.

Vehicle description: class a motor homes equipped with type 2 safety belts manufactured by amsafe. The front seat belt retractor located next to the driver and passenger seats will not allow the belt to be extended so that it can be used.

Vehicle description: light duty passenger pickup trucks equipped with 4.3L engines. The front brake line can contact the left-hand side of the engine oil pan causing the brake line to wear to the point of brake fluid loss during brake application.

Vehicle description: light duty passenger pickup trucks equipped with 4.3L engines. The front brake line can contact the left-hand side of the engine oil pan causing the brake line to wear to the point of brake fluid loss during brake application.

Vehicle description: passenger mini-vans. The center rear seat, right outboard side, safety belt anchor hook can become unattached from the body anchor position.

Vehicle description: passenger mini-vans. Covers on the solid stalk mounted seat belt buckles can become dislodged causing the release button to stick inside the cover. The buckle would then be only partially latched.

Vehicle description: light duty pickup trucks. The transmission bracket end fitting can separate from the shift cable assembly resulting in operator inability to shift the transmission from one of the drive gear positions into the park position.

Vehicle description: buses and heavy truck chassis equipped with cummins n-14, caterpillar, and detroit diesel electronic engines. The accelerator pedal rod material is excessively brittle and can break during a full throttle application.

Vehicle description: buses and heavy truck chassis equipped with t444e engines. The accelerator pedal rod material is excessively brittle and can break during a full throttle application.

Vehicle description: passenger vehicles equipped with 1.9L engines, built at the hermosillo assembly plant and originally sold or currently registered in arizona. Cracks can develop in the fuel tank near the heat shield attachment resulting in fuel...

Vehicle description: passenger vehicles equipped with 1.9L engines, built at the hermosillo or wayne assembly plants and originally sold or currently registered in nevada, florida, hawaii, texas, california, louisiana, georgia, south carolina, mississippi...

Vehicle description: heavy duty truck. The shoulder bolt which holds the grote turn signal switch case and components together can loosen resulting in the turn signal malfunctioning.

Vehicle description: light duty extended-cab pickup trucks and 4-door utility trucks. The lower steering shaft to steering gear pinch bolt is "finger loose" or missing allowing the bolt to loosen and fall out. The steering shaft yoke can wear causing an...