PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 548, Kenworth T480, T800, 2024-2025 Peterbilt 520, 567 and Kenworth T880 vehicles with PACCAR 20k steer axles. The steering arm and/or tie rod bracket fasteners may fail, resulting in...
Steering
Kenworth T800 Steering problems by year
2 complaints filed with NHTSA about the Kenworth T800's steering. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
Steering complaints by model year
Steering recalls
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 520, 567, and Kenworth T800, T880, W900, and W990 trucks. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the...
PACCAR Incorporated (PACCAR) is recalling certain 2023 Peterbilt 348, 367, 389, 548, 567, and Kenworth T370, T480, T800, T800B, T880, W900B, and W990 vehicles. The tie rod clamps may have been improperly heat-treated, causing them to fail and allowing the...
PACCAR Incorporated (PACCAR) is recalling certain 2022-2023 Kenworth T170, T270, T280, T370, T380, T440, T470, T480, T680, T800, T880, W900, W990, C500, and 2022-2023 Peterbilt 325, 330, 337, 348, 365, 367, 389, 520, 536, 537, 548, 567, and 579 vehicles. The...
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that...
PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with...
Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. The circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. Mislocation of the circumferential weld...
Kenworth is recalling model year 2010 t2000, t800, t660 and w900s trucks manufactured between july 1 and october 23, 2009. The fasteners attaching the steering gear to the front drive bracket may have received insufficient torque during the installation...
Paccar is recalling 2,096 my 2009 kenworth and peterbilt vehicles equipped with trw steering shafts. Mislocation of a circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn...
On certain kenworth and peterbilt heavy duty trucks equipped with tas-85 trw steering gears, the inner surface of the outer sector shaft teeth of the steering gears may have an incorrect involute profile, which may lead to chipping and damage of the gearing...
On certain trucks equipped with a trw tilt/telescoping steering column, the tilt locking mechanism on the steering column may disengage. This could prevent the steering column from locking in to predetermined positions.
On certain trucks equipped with the bendix electronic stability control (esp) system, the system uses multiple sensors and an electronic control unit (ecu) to control vehicle under steer, over-steer, and rollover situations. The system relies on vehicle...
Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000...
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which...
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Pitman arm pinch bolts may have been inadequately torqued.
Latest T800 steering complaints
I work for [[redacted]]. They are making me drive the truck unsafe without having any maintenance done to the truck and running over the hours from 12-20 hours a day. If they I don't take the loads they tell me to take or I am fired and I cannot afford not to work. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
NO SUMMARY LISTED FOR ABOVE VEHICLE. *AK
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data