Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control...
Brakes
Ram 2500 Brake problems by year
3,018 complaints filed with NHTSA about the Ram 2500's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
Brake complaints by model year
Brake recalls
Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 2500 and 2021-2022 Dodge Durango vehicles, and 2019-2022 3500 cab chassis with GVWR less than 10,000 lbs. The ABS control module software may prevent the electronic stability control (ESC) malfunction...
Chrysler (FCA US LLC) is recalling certain 2019 Ram 2500, 3500 and 3500 Cab Chassis trucks. The brake calipers may have been manufactured with an incorrect assembly fluid, which can cause the caliper's rubber seals to swell.
Latest 2500 brake complaints
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to complete the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue.
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to complete the recall repair was not yet available. The contact stated that the traction control, HCU, and ABS warning lights illuminated while driving over bumps or potholes. On several occasions, the warning lights remained illuminated. While driving approximately 45 MPH, the vehicle lost braking functionality and crashed into a tree. The vehicle sustained front...
Read the full complaint
end damage. The dealer was contacted and confirmed that the repair could not be completed because parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact emailed the manufacturer about the issue and requested assistance. The contact stated that the manufacturer failed to provide adequate assistance. The vehicle was towed to the residence. The failure mileage was approximately 172,000.
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated after several checks with the dealer, the parts became available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified and informed the contact that the recall repair was already performed. The contact stated that the...
Read the full complaint
vehicle was never taken to the dealer for the repair. The manufacturer informed the contact to take the vehicle to the dealer. The local dealer was contacted and stated that the vehicle was already repaired under the recall.
The contact owns a 2018 Ram 2500. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the failure occurred. The contact stated that while driving, the ABS warning light remained illuminated. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The failure mileage was 115,215.
The ABS Control module has had a recall on it for years. I have contacted every Mopar dealership with a 250 mile radius and every single one of them tell me they can not get the part. Although I can personally purchase it for around $400 online. Why do I have to pay for a recall part that I can buy from Mopar but a dealership refuses to comply with the recall.
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue.
The contact owns a 2018 Ram 2500. The contact stated that while driving 50 MPH with a loaded trailer, the brakes locked while depressing the brake pedal. Additionally, after depressing the accelerator pedal, the vehicle failed to respond. The contact stated that after a while the brakes slowly released, and the contact was able to resume driving. The contact associated the failure with NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the vehicle had previously been repaired under the recall....
Read the full complaint
The contact stated that the part that was used to repair the vehicle was the same part as the one that was removed during the repair. The dealer was contacted. The manufacturer was contacted by phone and made aware of the failure. The failure mileage was approximately 122,000.
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to complete the recall repair was not yet available. The vehicle was taken to the dealer, where it was confirmed that the parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide a remedy for the recall.
I received a Safety Recall notice back in [redacted] for the HCU ABS component on my 2018 Ram 2500 (C4B/NHTSA 24V-896). Subsequently, the ABS component failed shortly after so I took the truck into CardinaleWay Chrysler Dodge Jeep Ram Santa Rosa and they temporarily repaired the unit, but did not and have not had a replacement unit to resolve the recall notice safety issue. As stated on the paperwork, it is typed "Advised customer that the HCU is currently on recall, but the recall fix is not available at this...
Read the full complaint
time". To date, there has been no repair of that part made to my truck to resolve this safety recall, but the recall notice was removed by Stellanis on my truck, most likely following a conversation that I had with them last month expressing my concerns for safety when operating my truck and asking for an update on when the part would become available. I believe that Stellanis reported this as "fixed" fraudulently to the NHTSA and I would like for the NHTSA to investigate this thoroughly. I talked with NHTSA service agent "[[redacted]]" today about this issue and he assigned reference number [redacted] for the incident. I have attached the documents as per my statements above for review. I look forward to your reply on this matter. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA recall number 24V-896 was marked as completed on my vehicle but I'm telling you the work was never done. It was marked as complete on 27 September (that's a Sunday) of this year. I called Stellantis recall department and they just say it's complete but can't tell me who actually did the work or who completed it, just totally stonewalled me, so I'm contacting you. I haven't even been to a dealership in about 10 months for anything. This was either accidentally marked complete or fraudulent, I don't know, but this recall should still be listed as open for my truck. What do I do?
Vehicle Information: * Year/Make/Model: 2018 Ram 2500 Power Wagon * Affected Component: Electronic Stability Control / Service Brakes, Hydraulic / Electrical System * Associated Recall: FCA Recall C4B / NHTSA Campaign 24V-896 Description of the Safety Problem: The vehicle is completely disabled and non-running due to a high-current internal electrical short-to-ground within the ABS/Stability Control architecture. Attempting to turn over the engine instantly blows the heavy 30-amp Fuse F26. Diagnostics isolated...
Read the full complaint
the issue exclusively to the ABS module: when the main ABS electrical connector is unplugged, a fresh fuse does not blow, confirming a direct short within the module assembly. Because this is a Ram Power Wagon, the system failure also cascades into the disabling of vital off-road, safety, and stability control systems. Description of Manufacturer/Dealer Non-Compliance: According to the VIN registry, the manufacturer's authorized dealership marked FCA Safety Recall C4B (NHTSA 24V-896) as "Completed" on this vehicle. However, a physical inspection reveals that the required engineering remedy was never properly executed. The vehicle is still running the original, factory-defective components. The electronic ABS module physically installed on the truck bears part number 68351453AA. This "AA" suffix indicates the original, defective component architecture that is prone to internal failure and explicitly named in the manufacturer's initial safety report. Per official recall remedy instructions, a complete replacement of the HCU assembly with updated brush materials (such as part 68143491AB) is required. The dealership failed to install the authorized engineering remedy part, leaving the defective component in place while reporting the safety recall as closed to federal regulators. Because this component failure triggers a high-current short-to-ground, it presents an active vehicle fire hazard and has left the vehicle completely stranded.
The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue.
The contact owns a 2018 Ram 2500. The contact stated that the ABS and traction control warning lights were illuminated with a steady continuous audible chime coming from the vehicle. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 41,400.
The truck is under recall C4b for the ABS / Traction control system, which also disables the cruise control. I have called several times and had the vehicle into local dealerships and was told there is still no fix. I asked about trading in the truck and the dealers offered me way below KBB value stating they don't want the truck because of the recall. I ask Ram to help me out and they said there is nothing they can do. 3 times now in over the almost 2 years this truck has been under recall C4B the truck has only...
Read the full complaint
engaged the rear brakes during a panic stop causing me to almost crash. I talked with Ram recall department and that told me to stop driving the truck, I told them it was my only transportation. They then told me it's up to a dealership if they want to give me a rental until the fix becomes available, of course the dealers do not. I am frustrated and at wits end, the truck constantly dings at me turning the ABS light on and off all day everyday. I have had no use of my cruise control for almost 2 years, and can not pull trailers like I intended to do with the truck becuase the companies will not pass the truck in their inspections because of the ABS / Traction control lights being on. The lights have been coming on since about December of 2024, and stayed on since Febuary of 2025.
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the ABS and check engine warning lights were illuminated and the cruise control became inoperable. The vehicle was taken to the dealer, where it was diagnosed, and the failure was associated with the recall. The contact was referred to the manufacturer. The manufacturer was notified of the failure...
Read the full complaint
by phone and advised the contact to repair the vehicle, and a reimbursement would be provided when parts became available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 160,000.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data