Vehicle description: light duty pickup trucks. The seat belts fail to conform to the requirements of fmvss no. 209, "Seat belt assemblies."
Updated daily from NHTSA
Latest vehicle recalls
41 recalls announced in the last 30 days. Newest first - each one shows the problem, the risk, the free fix and every vehicle it covers.
Vehicle description: passenger vehicles. The protective rubber boot which covers the ball joint connection between the windshield wiper motor drive arm and the windshield wiper drag link can stick to the surface of the drive arm. If the rubber boot sticks...
Vehicle description: passenger vehicles. The evaporative emission control systems can apply excessive vacuum to the fuel tanks during the canister purge cycle. If excessive vacuum is applied, minor fuel tank distortion can result. A small crack could...
Vehicle description: pickup trucks equipped with 2.5L ohc engines. Engine coolant circulation through the heater circuit is prevented because of a plugged heater return tube (water pump inlet tube) at the water pump. These vehicles do not comply with the...
Vehicle description: trailer axle suspensions installed on wabash national trailers were assembled with incorrect brake camshafts. These trailers will not comply with the deceleration or parking requirements of fmvss no. 121, "Air brake systems."
Vehicle description: passenger vehicles. The automatic transmission anti-shift lock electromagnet must engage into a hole in the balancer in order to prevent the gear lever from moving out of the park position unless the brake pedal is depressed. If the...
Vehicle description: passenger vehicles. The automatic transmission gearshift lever utilizes a threaded knob with a release button. If the threaded knob is not positioned correctly on the lever, the release will not function correctly.
Vehicle description: passenger vehicles. The fuel return pipe in the engine compartment can wear through as the result of repeated contact with the exhaust manifold as the vehicle is driven. If the hose becomes damaged, fuel leakage could occur.
Vehicle description: passenger vehicles. The left-side steering knuckle arm was incorrectly assembled.
Vehicle description: mini motor homes. Certain pleated shades failed the requirements of fmvss no. 302, "Flammability of interior materials."
Vehicle description: class a motor homes. The generator exhaust gases can accumulate beneath the slide out portion of the motor home and can seep into the vehicle interior.
Vehicle description: passenger vehicles. The fuel feed line connecting the fuel filter to the engine delivered by the supplier for use in these vehicles may have been improperly manufactured.
Vehicle description: passenger vehicles. These vehicles may have been built with the left rear seat belt retractor attaching bolts incorrectly tightened.
Vehicle description: heavy duty trucks equipped with certain 12 volt power outlets. An unplugged hole in the floorboard can allow road salts and moisture into an area where a 12 volt power outlet is mounted.
Vehicle description: heavy duty trucks built with dual leaf spring type air ride suspensions and vehicles built with single leaf spring type air ride suspensions. Rear suspension springs can fracture through the center bolt hole after vehicle assembly.
Vehicle description: heavy duty truck models with 111", 113", and 122" cabs. The fuel tank steps can develop fatigue cracks due to excessive overhang.
Vehicle description: passenger vans equipped with a brake warning indicator. Some of these vehicles have a power steering cooler hose that can separate from the power brake booster fluid flow switch assembly.
Vehicle description: travel trailers. The axle assemblies were reversed which causes the brakes and springs to also be reversed.
Vehicle description: passenger vehicles not equipped with the anti-lock braking system (abs). A pressure conscious reducing valve (pcrv) in the rear brakes may be subject to corrosion and result in malfunction, when operated in areas that use salt compounds...
Vehicle description: passenger vehicles. Certain reservoir tank caps on the brake master cylinder were produced with a worn out die and lack ventilation holes. As a result, the pressure in the reservoir tank can drop gradually as the brake pad or shoe...