Latest vehicle recalls

Vehicle description: boat trailers equipped with brake solenoids manufactured by kodiak/ims. As a result of a defective solenoid valve, the brakes may not actuate properly, resulting in the brakes locking up on trailers hauling boats.

Vehicle description: passenger vehicles. The tie rods of the steering assembly are protected on each side by a seal to prevent moisture and dust particles from entering the swivel bearing mechanism. It is possible that some tie rod seals may not seal...

Vehicle description: heavy duty trucks. The vehicles involved in this recall were built for export with manual slack adjusters and were sold in the us. These vehicles need to have automatic slack adjusters in order to comply with the requirements of fmvss...

Vehicle description: minivans and passenger vehicles. A restraint control module (rcm) or a side or front crash sensor may have been assembled with one or more of the screws that mount the circuit board in the housing missing. If some or all of the...

Vehicle description: passenger vehicles. A decklid wire harness can fatigue and develop broken wires in the bend area of the wire harness.

Vehicle description: passenger vehicles. There could be inadequate contact between the bulb and socket which could cause the front turn signal not to function as designed.

Vehicle description: chassis cabs. On some of these vehicles, either or both of the two body pressure relief valves (prv) may not seal and could become inoperative during the life of the vehicle if the body installed on the vehicle does not protect the prv...

Vehicle description: passenger and sport utility vehicles. The bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle.

Vehicle description: passenger vehicles. These vehicles may have an ignition lock assembly with improperly seated key cylinder cap connector pins. Vibration can cause the connecting pins to loosen and/or fall out allowing the key cylinder cap to disengage...

Vehicle description: light duty pickup trucks equipped with dunlop tires, size lt215/85r16. These tires are experiencing deflation as a result of stress splits or cracks occurring from the point of attachment of the sidewall to the square bead wire bundle...

Vehicle description: motor homes. The front axle and/or front tires can encounter unequal side-to-side loading due to inappropriate loading or the vehicle's leveling device becoming improperly adjusted.

Vehicle description: motor homes. The furnace is exposed to a storage compartment.

Vehicle description: heavy duty trucks. A loss of the turn signal function can occur due to a turn signal flasher that is not compatible with the turn signal switches that allow the brake lights to override the hazard warning lights. If the hazard warning...

Vehicle description: sport utility vehicles. Under certain conditions, a front sway bar link can fracture.

Vehicle description: certain sport utility vehicles, pickup trucks, and passenger vehicles fail to comply with the requirements of fmvss 225, "child restraint anchorage systems." The affected expedition/navigator owner guides do not identify the locations...

Vehicle description: sport utility vehicles equipped with the 3.27 Or 3.55 Axle ration. The subject vehicles have a powertrain control module that could allow the vehicle to exceed the design intent top speed. At these extreme speeds, the vehicle could be...

Vehicle description: sport utility vehicles with steel hoods and certain pickup trucks equipped with sheet molding compound hoods. A wire formed hood striker could be susceptible to fatigue fractures. If the hood striker fractures, the hood could fly open...

Vehicle description: passenger vehicles. Some of these vehicles have experienced side air bag deployments in the absence of a crash.

Vehicle description: sport utility vehicles. The windshield wiper linkage can disengage due to a broken ball socket.

Vehicle description: fifth wheel travel trailers equipped with atwood mobile products' telescoping landing gear. The landing gear pin could shear under heavy loading conditions allowing the front end of the trailer to fall.