Latest vehicle recalls

Vehicle description: passenger vehicles. Some of these vehicles exhibit a condition in which the driver side impact air bag inflator separates from the air bag module during deployment.

Vehicle description: certain generation ii electric vehicles fail to comply with the requirements of fmvss no. 101, "Controls and displays." These vehicles were produced with a courtesy lamp control circuit in the right-hand junction block which can fail...

Vehicle description: electric vehicles. These vehicles were produced with wheel speed circuitry in the brake torque control module (btcm) which can cease to operate properly.

Vehicle description: certain passenger vehicles with medium graphite seat belts fail to comply with the requirements of fmvss no. 209, "Seat belt assemblies." An incorrect front center seat belt and retractor assembly may have been installed.

Vehicle description: certain limousines stretched over 60 inches fail to comply with the requirements of fmvss no. 109, "New pneumatic tires," and no. 110, "Tire selection and rims."

Vehicle description: passenger vehicles with midnight black or medium parchment seat belts manufactured on july 31, 2000, fail to comply with the requirements of fmvss no. 209, "Seat belt assemblies." An incorrect driver's side rear seat belt and retractor...

Vehicle description: certain passenger vehicles, pickup trucks and sport utility vehicles fail to comply with the requirements of fmvss no. 225, "Child restraint anchorage systems." Some of the owner's manuals for these vehicles are missing instructions...

Vehicle description: motor homes equipped with trw 20-edl ball-socket assemblies. Certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket. These bearings were produced...

Vehicle description: 1995 passenger vehicles equipped with the 2.0L and 2.5L engines, and 1996 vehicles equipped with 2.5L engines. Tightening of the engine cooling fan motor bearings, up to and including motor stall, can result in increased motor torque...

Vehicle description: passenger vehicles. The front suspension lower ball joints were not tightened to specifications when they were attached to the lower control arms.

Equipment description: mazda speed resinous hoods, designed and sold as accessory parts for model year 1992-1995 rx7 vehicles, manufactured between june 1, 1997, through september 19, 2000.

Vehicle description: certain school buses and transit buses equipped with national seating's series 93b-sb driver seat. A bracket attaching the gas spring shock to the height adjuster of the seat can deform and break. This bracket is located at the top...

Vehicle description: certain school buses built on navistar chassis and equipped with safety cross fixed position cross view mirrors fail to meet the requirements of fmvss no. 111, "Rearview mirrors." A bracket supplied with the mirror assembly was...

Vehicle description: certain school buses equipped with a storage compartment overhead to the left of the driver fail to meet fmvss no. 222, "School bus passenger seating and crash protection."

Vehicle description: passenger vehicles. The front suspension lower ball joints were not tightened to specifications when they were attached to the lower control arms.

Vehicle description: fifth wheel travel trailers equipped with dexter axles that were manufactured with a bearing option known as nev-r-lube. The optional hub utilizes a sealed cartridge bearing which is held in place with a retaining ring that prevents...

Vehicle description: heavy duty trucks. The brake pedal push rod that activates the service brakes could fracture.

Vehicle description: certain limousines stretched over 60 inches fail to comply with the requirements of fmvss no. 109, "New pneumatic tires," and no. 110, "Tire selection and rims."

Vehicle description: certain limousines stretched over 60 inches fail to comply with the requirements of fmvss no. 109, "New pneumatic tires," and no. 110, "Tire selection and rims."

Vehicle description: motor homes equipped with dana speciality axle ts6 tag axles. Hub overload can cause premature bearing failure at between 12,000 and 20,000 miles.