Vehicle description: passenger vehicles. A wrong clamp may have been installed on the window air bag units.
Updated daily from NHTSA
Latest vehicle recalls
41 recalls announced in the last 30 days. Newest first - each one shows the problem, the risk, the free fix and every vehicle it covers.
Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that...
Vehicle description: station wagons equipped with third seats. Users of the third seat, when exiting the vehicle, can come in contact with the tailpipe.
Vehicle description: motorcycles. The fuel sending unit gasket can swell providing inadequate sealing. If proper sealing is not provided, fuel can leak from the fuel tank.
Vehicle description: compressed natural gas (cng) fueled streetcars. The fuel tank support structure (cupola) was improperly fastened. These fasteners could loosen over time, causing complete structural failure on the cupola.
Vehicle description: passenger vehicles equipped with the sas sensor unit. These vehicles can experience air bag deployments in minor undercarriage impacts.
Vehicle description: fire trucks. A defective electrical harness, part no. 200185, Was used on these fire trucks, causing an inoperative 'check transmission light.' There would be no in-cab indication of a transmission fault which could lead to an...
Vehicle description: motor homes built with midland-grau tk-2 anti-lock brake system (abs). Pressure differential problems between front and rear brake systems can result in braking timing issues which can create excessive front brake wear.
Vehicle description: transit and school buses built with the rear axle five-spoke cast style wheel assemblies, codes 28a002, 28a003, 28a006, and 28a007. These assemblies have mis-matched wheel spacer and clamps, which could cause high stress on the wheel...
Vehicle description: passenger vehicles originally sold or currently registered in the following "salt belt" states: connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey...
Vehicle description: extended cab 4-wheel drive pickup trucks. Some of these vehicles have a lower than specified torque on all three of the steering gear to frame attachment bolts. The bolts can loosen over time allowing the steering gear to move. This...
Vehicle description: transit buses. The bolts fixing the radius rod locking tab plates were not lubricated before being tightened.
Vehicle description: passenger vehicles equipped with an automatic transaxle. The shift lever appears to be in "park," but can easily be moved from the "park" position without the use of the key, transaxle lever detent button, or depressing the brake.
Vehicle description: passenger vehicles equipped with a 3.8L v6 engine. Some of these vehicles were built without a heater hose clip which could allow the hose to sag and contact the oxygen sensor resulting in a coolant leak.
Vehicle description: all wheel drive passenger vehicles. Lockup of the transfer case can occur due to insufficient lubrication.
Vehicle description: if the vehicle is operated in a hot, humid environment with the window open and air conditioner running, it is possible for condensation to enter the audio unit and cause a short circuit.
Vehicle description: recreational vehicles equipped with 45 amp magnetek power converters. A weakened bypass capacitor on the converter's printed circuit board can cause a breakdown of the capacitor allowing electrical current leakage.
Vehicle description: street sweepers equipped with an optional automatic transmission shift lever that includes a park brake position. The transmission shifter/park brake lever can bind before fully engaging in the park brake position causing a false...
Vehicle description: school buses equipped with power steering. Some of these vehicles were assembled with an incorrect intermediate steering shaft. The overlap in the slip joint is insufficient allowing the steering shaft to separate.
Vehicle description: medium duty trucks built on a 165" wheel base, 4x2 chassis-cabs equipped with a 6.81 Engine, 5 speed manual transmission and optional 5.38:1 Rear axle ratio. The two-piece drive shaft can be damaged if the vehicle is driven at speeds...