Latest vehicle recalls

Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.

Vehicle description: pickup and utility trucks. Some of these vehicles have an internal component in the outboard seat belt retractors for the 2nd and 3rd row of seats that could be cracked. With repeated actuation of the locking mechanism, the crack could...

Vehicle description: certain sport utility vehicles fail to comply with requirements of fmvss no. 201, "Occupant protection in interior impacts." These vehicles have a console cover/armrest lid latch that could release at less than the 10g vertical load...

Vehicle description: travel and park trailers. A threaded pipe fitting was used in place of a flare fitting on the gas line connection to the stove, water heater, and furnace, which could result in a gas leak.

Vehicle description: heavy duty trucks equipped with chalmers 1000 and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.

Vehicle description: trucks equipped with drag link assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear...

Vehicle description: motor homes. The drive shaft bolts can come loose at the transmission and fall off. When the drive shaft separates from the transmission, the forward end of the shaft can drop to the ground, or come through the floorboards of the...

Vehicle description: motorcycles equipped with a newly designed engine stop switch. The engine stop switch is sensitive to accidental contact or strong jolting, such as hitting a pothole or riding over railroad tracks,which could cause the engine to cut...

Vehicle description: fire apparatus on certain commercial chassis with options for fuel tank step covers. Certain vehicles were built without drain holes in the aluminum step located below the fuel fill opening.

Vehicle description: passenger vehicles. In the presence of oil and heat, the brake booster vacuum hose could swell and loosen from the intake manifold.

Vehicle description: pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: the ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000...

Vehicle description: minivans. The lower control arm pivot bolt could fracture.

Vehicle description: heavy duty, class 8, trucks equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can...

Vehicle description: sedans equipped with an "auto-up" power window feature on the driver's door. The driver's side power window control unit can fail, and depending on the failure mode, the window could become inoperative, open or close independent of...

Vehicle description: passenger vehicles. Sulfur in fuel interacts with certain additives found in widely available gasoline causing sulfur to become deposited on the contact points of three fuel sending units mounted inside the fuel tank. This could cause...

Vehicle description: transit buses equipped with arvinmeritor "w-series" air-actuated brake cam rollers. These rollers were installed as original equipment and also sold as replacement parts. The affected brake rollers may fracture if subjected to high...

Vehicle description: passenger vehicles. The side air bag wire harness for the driver position could be mis-routed, which could result in it being pinched or cut by the seat cushion tilt mechanism.

Vehicle description: motorcycles. Threaded fasteners used to attach the brake rotors to the front and rear wheel assemblies could fail due to hydrogen embrittlement. The failure could occur under the head of the fastener if a crack develops, causing a loss...

Vehicle description: motorcycles. The backlash split gear in the primary drive train could fail, causing damage to the clutch and adjacent components.

Vehicle description: motor homes built on spartan chassis equipped with axle assemblies which may have been manufactured with trw model 20edl ball sockets/drag links. The tie rod ball-socket bearings have a below specification case depth and/or hardness...